Anglo Traction

Good progress Norm . The 'Ole Dark Orse' is looking............well dark ! . Tea stains don't show either.

The wiring connectors used on Wheel Horse Tractors are the same as used in the U.S Automobile Industry (mainly). The Female Spade connectors are 'Packard type 56' , they have a locking facility when pushed into a connector block. I meticulously removed, cleaned and reused the ones on my '74' C-120 Loom I fabricated, as I wanted to keep it to spec and not do a Maplin or Halfords Bodge. The 5 pin connector block for the back of the Ignition Switch I fitted to mine was from the Oregon Aftermarket brand in the U.S. I will search my records for the part number. Tractor looks to be in good order, saw it on Auction, so good haul. Edit @ 1445 - ref 5 way connector. Google these- 5 way oregon 33-350 or Delphi 5 way black 2973422 May be worth asking someone on RS nicely to make up a small parcel of bits......that's what I did.

I understand the difficulties with loss and ageing family members, had the last few years of that myself. I've noted all the Vacuum Bagger versions that use the Dump Carts in the Interchange List and noted they all refer to 32 and 37 inch SD Decks. When I got to the 80s on the list, the references began to look promising, but still no match. I'm signed up to several of the WH Yahoo Groups that Garry massively contributes to, and if he can't locate anything on there, I certainly won't be able to. Still, if the info is out there, I'm sure it will turn up.

Good to hear from you Andy, but sorry about your loss since I last liaised with you. An uncommon find and I assume you have already checked the WH Attachment Interchange Tables for this model, but I checked it and haven't found anything up to 1982 that fits the description. I'll keep looking for info on it.

Nice project Nigel. Only wish I continued with a similar design/project back in the 80s (1/2 scale Bugatti type 35) for my son. Look forward to seeing your progress on it.

Nice addition to a workshop . A Naerok RDM350M ? ... Good machine if so and popular with Model Engineers and University metalwork shops etc. back in 80s/90s. There are some Ball End Handles missing in the pic, but I assume you have them. Ignore the fact that the name is 'Korean' spelt in reverse, the quality back then was really quite good. I believe parts can still be obtained, albeit under other makers names. If you need reasonable quality/priced tooling for it, maybe check out Warco online (usual disclaimer).

I settled for Halfords stuff, as the old resin/polyurethane based fuel proof lacquer seems to be unavailable nowadays (set like glass and hard as nails). This stuff is compatible with my paint and decal material/adhesive, and I did not need a large quantity. They (on the instruction label) still have to state that spillages must be cleaned off asap though. I had to do a few tests on various finishes to make sure it was ok before I bit the bullet and used it.

Thanks Ian, although work and progress is slow. Fuel Tank done and finished with Fuel Proof Lacquer. Needs another week to cure fully. I changed the Pull Start layout again, did away with the inner Plate and made another Spacer Ring, so it is more like the original set up. Had to assume the finish was black. The original Rope was washed and the ends finished with Whipping to reduce fraying. The Handle cleaned by sanding, impregnated with Raw Linseed Oil and polished smooth- Throttle Cable routing done and stainless retaining clips made/fitted. It's rather a long 'S' type route, but it's smooth and there's no longer any strain where it enters the Carb. Lever is in good position too- Made new Blackened/ Oil hardened Flanged Washers for the Roller Shaft ends and the Shaft has been extended as described back at the start of page 3/post nbr #41 - Struggling with the Rear Rollers, namely finding quality old versions. I've used the ones off the 1954 Donor Mower, as they have the Brass Tube bore inserts, rather than just bored wood and are reasonable condition considering they've had 60 years use !. I'll give them a good soak in wood hardener, fill some of the hollows, stain and apply several coats of Yacht Varnish. I decided to cut one (good one) in half and cut the worn ends off the 2 - 8 inch long Rollers. This gave me 2 Roller sections on each side (original had 1 each side) of the new Spacer Tube. At least they are the same as the original length and may assist in turning with less drag- One disadvantage this Mower had was that it had to be tilted back onto the Rear Roller to pull the whole Mower when in Transit to and from Shed to Lawns, so they took a lot of punishment...I have a plan to eliminate this problem, but is another separate small project to deal with. So as mentioned previously, the Cylinder (Reel) has got to come out to be ground down so I can fix the clearance issues with the Bottom Blade Carrier. Need to save some cash for that, but at least I can finish all the parts ready to assemble and see if the Engine will spring into life ok .

I'm not sure if Bob Lewis is still breaking Wheel Horses, but you could try giving him a ring. Here is a link I found, as I've not been down t see him for a long while and I'd lost his email- http://www.misterwhat.co.uk/company/2145205-wheel-horse-breaker-Swindon Regards, Richard.

Small update and brief in content. Finally got some time on the machines and started making parts for the Pull Start. The original layout shown here in the Parts Manual, along with the Modified and welded up parts. All beyond saving/using- Not possible to reproduce parts to original spec exactly, as the Flywheel retaining Nut has been extended, which I find convenient, so I've made parts to accommodate that and so will be a one piece item when ready to fit (there is another Hexagonal bore behind the Rope-Pull Plate centre boss shown on the right in the pic) - Hoping for an opportunity to do more on this project soon.

Nice acquisition Darren. Good Tractor assuming it's all there and working ok. A nice coincidence with it is that it was built just before mine (15 units) as my '72' Raider 12 has the Serial number of 123172 !.

Glad to see you've been able to sort the problem. Happy to help and thanks for coming back with an update.

Sorry George !! ......it's my age

Looking good Mark. Bet you'll get some seat time churning up the garden before the Show

0.020" for points. 0.030" for the Plug.

Thanks Mark. It's a gooden again. Got around to swapping the Motor onto the Raider today and thought I'd try and do a (1st time) Video using my Son's Old Camcorder after finding the right software online. 'Ohnobucket' (photobucket) is a real pain for buffering lately, but I've put a link here anyway- http://i1190.photobucket.com/albums/z442/AngloTraction/th_Starter%20motor%20refitted_zpst600ns86.mp4 Video sound is never the same as real time .

Nice find, Koen . Look's like an 80's model. Way better condition than the only one I've ever found -

It's certainly adapted by upturning the Diff to turn the geared wheels in the correct direction. Also provides High clearance for Crop work. Reckon Koen (C-101plowerpower) has the best idea/example of what it used to be.

Wow, 63 .......your older than me !!!!. Hope you had a good day.

Sorry Nigel, I reckon 1973 . Can't read the rest of the number to get the month and day...... If you want to have a look at an Illustrated Parts List for it...... - http://www.partstree.com/parts/briggs-and-stratton/engines-horizontal-engine-with-recoil-starter/060102-0244-99-briggs-stratton-engine-rewind-starter/ . You can also download an IPL from B & S here - http://www.briggsandstratton.com/eu/en/search# Scroll the page down to see IPL and User manual choices.

A couple of good projects there. I really like those little engines and the variety of equipment they were fitted to. They are the sort of machines that you can sneak a few bits indoors to work on . Also good to have links in US for parts.

Received this image from Colin for perusal and clarification - Regards

Hello Colin, Just spotted your cry for help. I don't know anything about Mountfields, but I'll PM you my Email add so you can send me the pics to post for you here. As for the B115, I only have the Dry weight of a '78' B-111 which is 187kgs (don't know if it includes Deck). Also, the B-115 was marketed from 1980 -84 powered by Briggs 11hp with a peerless 5 speed. There is also an Auto model in 84 with an Eaton transmission. Please post your Tractor Model number and I'll confirm the Belt part number and length needed for the Transmission Drive for you.

Somehow I missed this post of yours. A 1902 Drummond must be one of the earliest machines produced by Drummond as a formed company?. I for one would like to see a pic of it on here if possible . It's probably of no help to you, but my 6" 4 jaw independent chuck is the Slim body version, direct threaded (Myford 1.1/8"x 12 whit) with no Back Plate and a metal relieved back face to reduce weight. It allows the Chuck to screw straight onto the Spindle with little overhang, reducing load on the spindle etc. If you can find one of those, I'm sure that would be the best option and make the adaptor to fit both threads. If I am correct, the Drummond Spindle nose of that date is threaded 3/4" x10tpi Whitworth ?.

Well found Koen ! . A little light reading tonight then?.