Potash123 26 #1 Posted January 22, 2016 Hi Lads. as you probably noticed I have a Hayter 21 and a Hayter Osprey. The front wheels are a bit tired but not beyond a refurb. I have noticed Hayterette wheels for sale on ebay. 005 111-1479-1135, Question, will these fit the front wheel axles of my two rough cuts ? Thanks Colin Share this post Link to post Share on other sites
Wristpin 399 #2 Posted January 22, 2016 Should be 200mm diameter and OK for your job but there have been several changes of part number and the trail is a bit obscure! I believe that the original wheels for Ospreys and 21s of your era would have had three piece bearings - cup, race and cone - but the current ones have encapsulated bearings. Share this post Link to post Share on other sites
Potash123 26 #3 Posted January 23, 2016 I did notice the old bearing set up, I think the encapsulated wheel bearings would do a better job. I have just measured the wheels on the Osprey they are 170 mm ? Thanks for the reply. Colin Share this post Link to post Share on other sites
Wristpin 399 #4 Posted January 23, 2016 I did notice the old bearing set up, I think the encapsulated wheel bearings would do a better job. I have just measured the wheels on the Osprey they are 170 mm ? Thanks for the reply. Colin Tread wear ! Share this post Link to post Share on other sites
