Leaderboard

I finally decided that this project will be a 2 stroke powered Water Pump. I rescued this old slurry pump with pickup strainer after laying derelict outside for 30 years- I fully rebuilt this back to new internally and improved the appearance with a bit of cleaning etc. Early 1960s 1" BSP Jabsco model of considerable durability- Still being manufactured and this version/size will set anyone back £250 + without fittings !. Low running speed of about 500 rpm will shift 80 ltrs per min and can pump/self prime comfortably from 5 metres head of water. All this pump work was done several years ago. Not wanting to use belting for drive(s), my options are :- inline flexible coupling, chain drive, or combination of both. Will be mounting this on a wheeled truck of some kind to tie in with the general style theme. Just starting on the engine mounts. Regards.

Good evening stormin. I live in Tonbridge Kent. My horses are all stable up for winter will get photos when let out . I have got one raider ten show.tractor . One raider fourteen with winch show tractor. One wheel horse 312-8 working machine. One wheel horse c-141 with snow blade and grader blade all fitted.two toros one pulling tractor one with cutting deck both working machines. One 1960 fordson Dexter again a working machine Regards Richard

Yes, some of the 13B engines have some differences in the carb. The later carbs have a little rubber stopper on the diaphragm arm that replaced the little steel ball bearing. Another change was the little brass inlet nipple/valve you referenced. Without seeing the issue up close I’m not sure what to suggest to fix it. If it’s just slightly loose but the actual valve is still functioning internally, could you maybe use a little bit of epoxy or JB to help seal it and snug it up where it connects to the carb body?

Next Saturday is a smaller get together up in Maine so figured I'd bring up some of the stuff that doesn't go to the big shows. They haven't seen the light of day in a LONG time so it'll be nice for people to see them. They're too small and expensive to leave unattended at the big shows although I have never heard of any stealing of anything at any of them. Just a small sample and will probably bring about 20-25 tools or so depending on available time to get them out. Pictures of the entire display all together next week NOS PC3 Fogger LA Fire Dept's Fan Bridge's Drill from UK Grass trimmer from UK Petro Drill Lapadary saw NOS green Amp Champ Orline Cut Off saw