Ransomes256
-
Content Count
48 -
Joined
-
Last visited
Reputation Activity
-
Ransomes256 got a reaction from Stormin in Petter PAZ1
Norm,
Sorry I do not know the answer but stationaryengines.com list the rings and bearings so can probably tell you.
I also see that agrimanuals.com have copies of the operators handbook available.
Neil
-
Ransomes256 got a reaction from Stormin in Ransomes MG2 Flywheels
I am happy to say I will be getting a delivery of replacement steel flywheels for Ransomes MG2 tractors.
I took the decision to commission a number of these to be manufactured to help with the common breakage issue.
I will not get another batch machined so first come first served.
£205.00 plus carriage.
Contact me on njarrett@btinternet.com
Stay Safe.
Neil
-
Ransomes256 got a reaction from slf-uk in Imperial clevis fork supplier
Iain,
Here is a good UK supplier for these.
Springfix Linkages
(Automotion Components Ltd)
Alexia House
Little Mead Industrial Estate
Cranleigh
Surrey GU6 8NE (UK)
Telephone 01483 26 6784
Fax 01483 26 6785
info@springfixlinkages.com
Neil
-
Ransomes256 got a reaction from ploughmen in oops rim
May be worth checking the wheel on the other side as well.
Neil
-
Ransomes256 got a reaction from squonk in Cadmium Spray Paint
Jonathan,
The company is Eastwood and is available from Frost www.frost.co.uk
Neil
-
Ransomes256 got a reaction from squonk in We've got snow
Nice picture of a frost ! When are you expecting the snow?
-
Ransomes256 got a reaction from HeadExam in We've got snow
Nice picture of a frost ! When are you expecting the snow?
-
Ransomes256 got a reaction from meadowfield in We've got snow
Nice picture of a frost ! When are you expecting the snow?
-
-
Ransomes256 reacted to expeatfarmer in Hesket New Market Agricultural Show.
I enjoyed the show and company Norman thanks for coming. Managed to load the barge by pulling broken throttle cable in my hand. Just found the wheels this morning thank you do I owe you?
-
Ransomes256 got a reaction from Triumph66 in Heat induction tool
I have access to one of these and they are brilliant. Apart from the cost there are some other restrictions in that you require a variety of induction loops depending on the diameter or surface being heated and access. This of course increases the cost as if you have the tool it would be most frustrating if you did not have the correct adaptor to allow it to be used.
Currently not a DIY tool due to cost.
Neil
-
Ransomes256 got a reaction from harryt in Heat induction tool
I have access to one of these and they are brilliant. Apart from the cost there are some other restrictions in that you require a variety of induction loops depending on the diameter or surface being heated and access. This of course increases the cost as if you have the tool it would be most frustrating if you did not have the correct adaptor to allow it to be used.
Currently not a DIY tool due to cost.
Neil
-
Ransomes256 got a reaction from S1g in Ransomes mg6 price
It depends on the version of the engine.
If there is no vaporiser it is designed to work on petrol.
If it has a vaporising box it will run on both petrol or TVO but may not like straight petrol due to lower compression ratio and fuel getting to hot.
If there is a cox atomiser still fitted to the vaporiser and you only want to run on petrol it may be best to remove it.
Neil
-
Ransomes256 got a reaction from expeatfarmer in Newby Hall 11th 12th june
Jonathan,
Not that I was planning to go but will be on our way to Mexico for our 25th Anniversary so not available anyway.
Neil
-
Ransomes256 got a reaction from pmackellow in Ransomes MG6
I recently purchased a quantity of new spares and as part of the arrangement had to take the tractor.
This is a very good MG6 serial number 12304 circa 1957 which does not appear to have seen much work.
Fitted with a Ransomes 600cc petrol engine and standard 3 speed gearbox with the optional PTO and Hydraulic rear lift.
The lift cylinder is the large version and all works well.
The Amal 356/1 carburettor has been serviced and the magneto overhauled. Compression was low so valves have been
lapped in and bore is on standard size. Engine starts and runs very sweet.
Tracks are exceptional as are the drive wheels and weight carrying rollers.
Ideal as a working machine or for ploughing matches.
Looking for £1500
-
Ransomes256 got a reaction from Triumph66 in Ransomes MG6
I recently purchased a quantity of new spares and as part of the arrangement had to take the tractor.
This is a very good MG6 serial number 12304 circa 1957 which does not appear to have seen much work.
Fitted with a Ransomes 600cc petrol engine and standard 3 speed gearbox with the optional PTO and Hydraulic rear lift.
The lift cylinder is the large version and all works well.
The Amal 356/1 carburettor has been serviced and the magneto overhauled. Compression was low so valves have been
lapped in and bore is on standard size. Engine starts and runs very sweet.
Tracks are exceptional as are the drive wheels and weight carrying rollers.
Ideal as a working machine or for ploughing matches.
Looking for £1500
-
Ransomes256 got a reaction from hpearce in Ransomes MG6
I recently purchased a quantity of new spares and as part of the arrangement had to take the tractor.
This is a very good MG6 serial number 12304 circa 1957 which does not appear to have seen much work.
Fitted with a Ransomes 600cc petrol engine and standard 3 speed gearbox with the optional PTO and Hydraulic rear lift.
The lift cylinder is the large version and all works well.
The Amal 356/1 carburettor has been serviced and the magneto overhauled. Compression was low so valves have been
lapped in and bore is on standard size. Engine starts and runs very sweet.
Tracks are exceptional as are the drive wheels and weight carrying rollers.
Ideal as a working machine or for ploughing matches.
Looking for £1500
-
Ransomes256 got a reaction from diggerjames in Ransomes MG6
I recently purchased a quantity of new spares and as part of the arrangement had to take the tractor.
This is a very good MG6 serial number 12304 circa 1957 which does not appear to have seen much work.
Fitted with a Ransomes 600cc petrol engine and standard 3 speed gearbox with the optional PTO and Hydraulic rear lift.
The lift cylinder is the large version and all works well.
The Amal 356/1 carburettor has been serviced and the magneto overhauled. Compression was low so valves have been
lapped in and bore is on standard size. Engine starts and runs very sweet.
Tracks are exceptional as are the drive wheels and weight carrying rollers.
Ideal as a working machine or for ploughing matches.
Looking for £1500
-
Ransomes256 got a reaction from Stormin in Ransomes MG6
I recently purchased a quantity of new spares and as part of the arrangement had to take the tractor.
This is a very good MG6 serial number 12304 circa 1957 which does not appear to have seen much work.
Fitted with a Ransomes 600cc petrol engine and standard 3 speed gearbox with the optional PTO and Hydraulic rear lift.
The lift cylinder is the large version and all works well.
The Amal 356/1 carburettor has been serviced and the magneto overhauled. Compression was low so valves have been
lapped in and bore is on standard size. Engine starts and runs very sweet.
Tracks are exceptional as are the drive wheels and weight carrying rollers.
Ideal as a working machine or for ploughing matches.
Looking for £1500