Jump to content
wheeledhorseman

Swan Generating Set

Recommended Posts

Here we have a ‘Swan’ generator set that I got about fifteen years ago. The guy that sold it to me said it was military and certainly a number of features pointed to that being true i.e. the bronze green paint, the connection terminals were the same as used on military lighting sets, and perhaps most compelling, the fact that the spec included brass drain off cocks for the sump and gas tank (after all who else would specify costly additions like that?)

 

On the other hand there was not one piece of hard evidence in the form of a tag to confirm it as military and all attempts to identify it as military or otherwise failed at that time.

 

post-103-0-18205800-1390676355_thumb.jpg

post-103-0-57933800-1390676370_thumb.jpg

post-103-0-12823100-1390676384_thumb.jpg

post-103-0-51425100-1390676401_thumb.jpg

 

I last ran it perhaps eight years ago and it’s been gathering dust on the workshop shelf ever since. In fact I wouldn’t have given it a thought were it not for seeing a photo posted on the forum by Steve D where in the background was a gen set looking very much like mine as far as I could see. It spurred me on to research again and since I last tried a couple of sites had popped up with the answers.

 

Turns out it is military and is a bit of Cold War memorabilia. These were built by two different companies for the Royal Observer Corps who manned posts which included an underground bunker. Their main role was to report nuclear bomb bursts and monitor background radiation from installations like this:

 

post-103-0-77837200-1390676582_thumb.jpg

 

Lighting in the little underground bunker was provided by batteries like these.

 

post-103-0-20855200-1390676637_thumb.jpg

 

If I’m not mistaken those are NiFe cells with a pd of 1.2 volts, hence the crate of five cells represents a 6 volt battery. Two of these provided the 12 volts for the lighting and the need for a 12 volt charging system. The batteries remained in the bunker and were charged from the surface outside.

 

post-103-0-15633900-1390676716_thumb.jpg

 

The gen sets were made either by A C Morrison (Engineers) Ltd of Southampton or Engine Applications Ltd of Banbury. Documents refer to the engine as Villiers but it is in reality a JAP (Villiers having absorbed JAP in 1959). It drives a three phase permanent magnet alternator rated at 300 watts and the case contains full wave rectifier diodes to produce the DC output.

 

So there you have it – if you see one at a show you’ll know what it was for. The name ‘Swan’ for the Banbury produced version came from their address in Swan Close Road. The company was founded in 1959, became RTD Swan in 1973, and Swan Generators in 1986. They still make generating sets at Banbury today but nothing this small, their range is 20kVA to 2200kVA.

 

Some photos are from these sites

 

http://therocproject.webs.com/  and

 

http://www.subbrit.org.uk/cgi-bin/webdata_roc.pl?fid=988265546&query=Post%2BName%3Dturton%26OS%2BGridRef%3D%26County%3D%26Date%2Bopened%3D%26Date%2Bclosed%3D%26Location%3D%26Description%3D%26Surface%2BStructures%3D%26Date%2Bof%2Bvisit%3D%26Future%2Bactions%3D%26pagenum%3D1%26cgifunction%3DSearch&cgifunction=form

 

where you can find out more if interested.

 

Andy

 

Share this post


Link to post
Share on other sites

Sorry to drag this thread back from the dead but I've just got back from picking one of these up. I was only supposed to be picking up the Allam Minigen that I won on ebay but the guy said 'are you interested in this...?' 

 

Well, you know how it goes...:D

Share this post


Link to post
Share on other sites

This is the genset I have it has a JAP engine, I have never tried to start it but it turns over freely. The tube on the left of the first picture is for storing the starter cord which is missing,

IMG_2264.JPG

IMG_2264.JPG

IMG_2262.JPG

Share this post


Link to post
Share on other sites

Is this still available expeatfarmer?  We are renovating an ROC bunker and thsi would be great back in its original surroundings!!

 

Share this post


Link to post
Share on other sites
On 1/25/2014 at 7:14 PM, wheeledhorseman said:

Here we have a ‘Swan’ generator set that I got about fifteen years ago. The guy that sold it to me said it was military and certainly a number of features pointed to that being true i.e. the bronze green paint, the connection terminals were the same as used on military lighting sets, and perhaps most compelling, the fact that the spec included brass drain off cocks for the sump and gas tank (after all who else would specify costly additions like that?)

 

On the other hand there was not one piece of hard evidence in the form of a tag to confirm it as military and all attempts to identify it as military or otherwise failed at that time.

 

post-103-0-18205800-1390676355_thumb.jpg

post-103-0-57933800-1390676370_thumb.jpg

post-103-0-12823100-1390676384_thumb.jpg

post-103-0-51425100-1390676401_thumb.jpg

 

I last ran it perhaps eight years ago and it’s been gathering dust on the workshop shelf ever since. In fact I wouldn’t have given it a thought were it not for seeing a photo posted on the forum by Steve D where in the background was a gen set looking very much like mine as far as I could see. It spurred me on to research again and since I last tried a couple of sites had popped up with the answers.

 

Turns out it is military and is a bit of Cold War memorabilia. These were built by two different companies for the Royal Observer Corps who manned posts which included an underground bunker. Their main role was to report nuclear bomb bursts and monitor background radiation from installations like this:

 

post-103-0-77837200-1390676582_thumb.jpg

 

Lighting in the little underground bunker was provided by batteries like these.

 

post-103-0-20855200-1390676637_thumb.jpg

 

If I’m not mistaken those are NiFe cells with a pd of 1.2 volts, hence the crate of five cells represents a 6 volt battery. Two of these provided the 12 volts for the lighting and the need for a 12 volt charging system. The batteries remained in the bunker and were charged from the surface outside.

 

post-103-0-15633900-1390676716_thumb.jpg

 

The gen sets were made either by A C Morrison (Engineers) Ltd of Southampton or Engine Applications Ltd of Banbury. Documents refer to the engine as Villiers but it is in reality a JAP (Villiers having absorbed JAP in 1959). It drives a three phase permanent magnet alternator rated at 300 watts and the case contains full wave rectifier diodes to produce the DC output.

 

So there you have it – if you see one at a show you’ll know what it was for. The name ‘Swan’ for the Banbury produced version came from their address in Swan Close Road. The company was founded in 1959, became RTD Swan in 1973, and Swan Generators in 1986. They still make generating sets at Banbury today but nothing this small, their range is 20kVA to 2200kVA.

 

Some photos are from these sites

 

http://therocproject.webs.com/  and

 

http://www.subbrit.org.uk/cgi-bin/webdata_roc.pl?fid=988265546&query=Post%2BName%3Dturton%26OS%2BGridRef%3D%26County%3D%26Date%2Bopened%3D%26Date%2Bclosed%3D%26Location%3D%26Description%3D%26Surface%2BStructures%3D%26Date%2Bof%2Bvisit%3D%26Future%2Bactions%3D%26pagenum%3D1%26cgifunction%3DSearch&cgifunction=form

 

where you can find out more if interested.

 

Andy

 

That post cant have been a master post.  I'm currently helping out a little with a local master post which has been renovated and the charging lead from the swan generator plugs into a socket behind the black cap on the air shaft.  It also contains an rf connector and a pneumatic connector for the antenna mast.

 

The power from the generator then goes to a two way switch (on the far wall) which allows you to have one battery in use whilst the other one charges.

 

 

301835569_487046136760559_8682172877254161340_n.jpg

302274417_487046110093895_2428194779773043462_n.jpg

Share this post


Link to post
Share on other sites

Great to see the post restored, brilliant job! :)

 

I got mine running after cleaning and setting the points and cleaning the carb out. A short video here: Swan Charging Set - YouTube

 

There was a mention of these sets in a recent issue of 'Stationary Engine' magazine, it seemed to suggest that they dated from WW2 which is clearly not the case. But were they used by any other branches of the military?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...