Jump to content
Sign in to follow this  
the showman

Name this Plough.

Recommended Posts

What You have is one third of the Wheelhorse implement package, Plough, Discs and Cultivator assemblies which all use the same mounting beam.:thumbs: I have the other two thirds, I'm missing the plough:(. Have a look in the Wheelhorse magazine 1981 on Red Square, it shows the setup.

The clevis part on the front can be fitted in either of two positions,  one way up it's square to the beam for the discs or cultivator, or turned over it is at the correct angle for ploughing use.

The furrow wheel looks to be an addition, it's not shown in the original pictures.

P1020800.JPG

Share this post


Link to post
Share on other sites

That’s great Doug and nice to hear from you, it’s good to see a photo of one as I haven’t been able to find anything on google about it.

given me all sorts of ideas now.

That explains why some of it is red. :P

I can’t find it on Redsquare can you tell me where to look please Doug 

Share this post


Link to post
Share on other sites
10 hours ago, ranger said:

What You have is one third of the Wheelhorse implement package, Plough, Discs and Cultivator assemblies which all use the same mounting beam.:thumbs: I have the other two thirds, I'm missing the plough:(. Have a look in the Wheelhorse magazine 1981 on Red Square, it shows the setup.

The clevis part on the front can be fitted in either of two positions,  one way up it's square to the beam for the discs or cultivator, or turned over it is at the correct angle for ploughing use.

The furrow wheel looks to be an addition, it's not shown in the original pictures.

 

 

I have the mouldboard and adjuster but no bracket or coulter for one of these, perhaps your missing plough :rolleyes:

Share this post


Link to post
Share on other sites

In haste i made a quick hitch on Friday just to try it in the ground, it dug in well but had a lot of sideways movement so I decided to make a new one but only had the photos of above to go on.

Just using some scrap bits of angle iron and a lump of plate, drill and welder this is what i came up with. 

BBF37992-E00C-4B38-9409-02AF846033A0.jpeg

57D8DAD5-5CBF-44C6-A994-00B477014DC8.jpeg

1046C9F5-6335-4CC1-99AE-4C67C4E71255.jpeg

A00465DB-2282-4339-B822-2490FEC93BAE.jpeg

62A7A6C0-E80B-42D4-BB49-C4A4666EDBCA.jpeg

5FFAB7CF-21D5-4F34-A60B-B9E2E9314015.jpeg

EC2AE763-8E08-4789-B7B3-42F7D8B71152.jpeg

577B35DC-4C2E-4342-9AA8-3E10DCFA7103.jpeg

52C2BA08-7C8F-41B6-BA71-D3852389C6F2.jpeg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...