Potash123 26 #1 Posted November 3, 2016 Hi Lads. Bought another Hayter rough cut ! Are the screw in exhausts still about or do I have to search for a second hand one. Hayterette model ... thanks. Share this post Link to post Share on other sites
Mister Mad Mower 64 #2 Posted November 3, 2016 If you are after an authentic look for an older model then i would get the nearest new model an example of such is -http://www.ebay.co.uk/itm/Exhaust-Fits-BRIGGS-STRATTON-Engine-391569-299477/330779307873?_trksid=p2045573.c100507.m3226&_trkparms=aid%3D555014%26algo%3DPL.DEFAULT%26ao%3D1%26asc%3D38661%26meid%3Dc70b8ac888d6435cbf544bc90979833f%26pid%3D100507%26rk%3D1%26rkt%3D1%26 And plate over or weld fill the end holes and fit a pipe straight down to match the deck hole , as i have not noticed any new ones of the old varieyt of Hayterette for sale . Though the pipe of the one shown does look to be a little long and maybe it may have to be reduced and re threaded also . Share this post Link to post Share on other sites
Potash123 26 #3 Posted November 4, 2016 Thanks Mr. Mad, perfect. Will have to build another shed, far too many mowers for the time of year. Share this post Link to post Share on other sites
Mister Mad Mower 64 #4 Posted November 4, 2016 4 hours ago, Potash123 said: Thanks Mr. Mad, perfect. Will have to build another shed, far too many mowers for the time of year. Glad to help , my old Hayterette blew the can off the pipe earlier on in the year but i just welded it back on . Share this post Link to post Share on other sites
