Rayp 46 #1 Posted June 15, 2020 Whilst reassembling my 5HP B & S engine I noticed that the oil splasher was missing a part, namely the sliding 'plunger' in the middle. I thought that I could use the splasher my 7HP engine as a stopgap and replace that later. However, the Splasher from the 7HP is larger and will not fit the 5HP. Does anyone have a scrap engine with a usable oil splasher or a replacement oil Splasher or even the missing part? The 7HP splasher is on the right of the photo and the 5HP (with the missing part) on the left. Share this post Link to post Share on other sites
