tvenetis 0 #1 Posted 7 hours ago (edited) I took the plug outlet apart on a tiny tiger generator and spread the 2 contacks because they were not making good contack when i plugged some thing in to it. I put the plug back in with the wires inserted and I put the center u piece with a screw which held the plug in. I noticed that after the screw was snug there was nothing holding the 2 plug pieces that had the wire solder to them in. You can just pull the wires out of the socket. What I am trying to ask is that after the plug recepticle is screwed in to the rear housing of the generater, when you plug something in to it what prevents the 2 wires from comming out of from the plug socket. Edited 6 hours ago by tvenetis revise it Share this post Link to post Share on other sites
