godfreystu 1 #1 Posted September 23, 2016 Hi I bought a mg2 18 months ago it did run until we got it to the trailer and i have not got it to start since, mainly due to work commitments.My knowledge of machines is limited and would like to know if there is someone within 20 miles of Peterborough who could help me get it started. I am willing to put it on my trailer and bring it. Thanks Stu Share this post Link to post Share on other sites
expeatfarmer 591 #2 Posted September 26, 2016 If you fancy bringing it to Newbury on 8th/9th October ( Tractor World ) we could have it as a project on the stand and get it going for you . 1 godfreystu reacted to this Share this post Link to post Share on other sites
godfreystu 1 #3 Posted September 27, 2016 The problem i have is i work weekends as an outside bar caterer and that weekend is busy with 4 different bars funeral Friday 2 parties Saturday and an anniversary Sunday. My only way of doing it is to bring it down Friday night and leave it with you and pick it up Sunday evening.Would this be possible? Obviously i would cover any costs incurred. Stu. Share this post Link to post Share on other sites
expeatfarmer 591 #4 Posted September 27, 2016 Sounds like you are a busy chap. I wonder if there are any other owners going to the show who would fancy working on it with me ? Pretty sure that Neil will have plug, points, condenser and carb jets for us to use if needed. 1 godfreystu reacted to this Share this post Link to post Share on other sites
hpearce 40 #5 Posted September 27, 2016 I will have a go, have limited experience but will bring my cranking arm. Share this post Link to post Share on other sites
expeatfarmer 591 #6 Posted October 4, 2016 To save us making too much mess at the show, could you drain out any old petrol and put a 1/2 gallon of fresh in the tank, would also be good if you could drain and refill the air filter with sae 20 oil. Don't forget to bring the starting handle. Share this post Link to post Share on other sites
