LangyLang 0 #1 Posted September 3, 2018 Hello all, My dad recently purchased a B-115 5 speed manual and I have been tasked with fixing it up. Tractor starts and runs fine but the drive belt keeps jumping off what appears to be an idler pulley, I am looking for a diagram of the belt assembly and a part number for the belt, I have not taken anything apart yet to see if the pulley is deformed or if the bearings are worn out. I was going to do a little bit of research first and try to get an idea of what the assembly is supposed to look like be fore taking it apart, the identification number is:02-11BP05-14168, any help and insight is greatly appreciated, thanks! Lang Share this post Link to post Share on other sites
the showman 4,074 #2 Posted September 4, 2018 Hi and welcome to the forum, if you look down to files there's a service manual that covers your tractor, if you look down to gearbox and drive there's a picture of the belt and idlers Share this post Link to post Share on other sites
LangyLang 0 #3 Posted September 4, 2018 Thanks Showman, is that under downloads? I found a manual for the B series there and I can mostly make out the picture for the belt diagram and it looks very similar to what I have but is for the B-111 and not the B-115. Share this post Link to post Share on other sites
Anglo Traction 1,016 #4 Posted September 15, 2018 Missed this one somehow. Everything you need is -HERE- type your model number 02-11BP05 in the box. Share this post Link to post Share on other sites
LangyLang 0 #5 Posted October 29, 2018 Thanks Anglo Traction, turns out the idler pulley bolt was loose and the pulley was wobbling. After I do some tuning up, I will be putting a new belt on, thanks. Share this post Link to post Share on other sites
