Chitzu 4 #1 Posted August 6, 2013 I needed a small boat to putter around in and get through lilly pads so this worked out great. Made from a washer tub,several bicycles and lawnmowers. There is a rudder in back and the wheel adjust up and down to keep the right amount in the water regardless of the load,this is a must have if you build something similar. 5 speed tranny and reverse so I can keep the motor at near idle and is quieter that way. A piece of downspout painted to look like a steamboat stack sets it off.The 14 foot flatbottom boat is just right to get through lilly pads and get up into the trees. You will need a motor with a cast iron flywheel if you use a pushmower engine, I have been able to change over from aluminum to iron on some of the older Briggs. 1 KATO reacted to this Share this post Link to post Share on other sites
nylyon 171 #2 Posted August 6, 2013 Ok, this one needs a video! Share this post Link to post Share on other sites
KATO 7 #3 Posted August 7, 2013 I second the video !! Share this post Link to post Share on other sites
Chitzu 4 #4 Posted August 7, 2013 I have never even shot a video let alone upload and post.I'll need a kid to film and show me how,probably about 6 year old would know. Share this post Link to post Share on other sites
Wallfish 687 #5 Posted August 10, 2013 Great post! This is exactly the kind of backyard engineering I like to see. Thanks for sharing! Share this post Link to post Share on other sites
KC9KAS 3 #6 Posted August 12, 2013 Very neat...I like it! Share this post Link to post Share on other sites
amcrules00 24 #7 Posted January 26, 2014 Now, if that was only Techy powered...LOL! Share this post Link to post Share on other sites
Ian 2,417 #8 Posted January 26, 2014 Home engineering at it's finest.. Love it Share this post Link to post Share on other sites
