Lauren1985 6 #1 Posted August 20 (edited) Hello Everyone I need the Belt Pulley bearings. they are ball bearings. The Original part was 2384. obviously long since obsolete BUT Does anyone know the size of the bearings needed. I dont really want to dismantle it until i have the new parts. Thankyou in advance Lauren Edited August 20 by Lauren1985 Share this post Link to post Share on other sites
Ransomes256 18 #2 Posted August 21 Not aware of the machine but have you looked at https://www.diyspareparts.com/parts/hayter I am just a happy user for other odd machine parts. Neil Share this post Link to post Share on other sites
Lauren1985 6 #3 Posted August 21 3 hours ago, Ransomes256 said: Not aware of the machine but have you looked at https://www.diyspareparts.com/parts/hayter I am just a happy user for other odd machine parts. Neil It's a hayter 21. It's the smaller version of the hayter osprey as pictured and described in this post Share this post Link to post Share on other sites
Anglo Traction 1,016 #4 Posted August 24 Only chance may be to send Rayp a personal message, he may well have replaced them on his machines and remember the bearing numbers. He last visited this Forum (signed in) in June, so may not be aware of your dilemma. Last inevitable resort will be to dismantle and read the numbers or measure accurately the dimensions (this what I would do in case the wrong bearings are suggested). The spindle should tap out gently (ensuring the nut is in place before hitting it). You may need a puller/press to remove/insert the bearings. Share this post Link to post Share on other sites
chrisdee8h 0 #5 Posted November 13 (edited) Did you find out which bearings you need yet ? I have a spare hub with the bearings still in and can knock one out and measure it up. They are usually a standard size and easy to get hold of. Edited November 13 by chrisdee8h Share this post Link to post Share on other sites
