Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 01/04/2019 in Posts

  1. 1 point
    I just looked after the above post and found the other trimmer with a yellow cover. It seems like it may have a broken connecting rod. I may have a rod in all the parts or a parts motor. The red trimmer, as I said, ran many years back when I shelved it. This is all the collection less the generator and model boat conversion which I will keep. They could be bought at a high price though. . Still for sale and pickup. Offers?
  2. 1 point
    I have found the outboard motor and 1 of 2 hedge trimmers. The motors were looked at and both have good compression. They most likely would run again. The out board was stuck. I looked at the lower unit and it appears a bronze bushing is frozen to the prop shaft. Maybe some heat would loosen it. It needs to be compare to a blown up sketch to see if it is a separate bearing. The angle gear may be pressed on and It should not be disturbed. The recoil spring is returning slowly. Needs grease and it will be fine.The top tank cover has stress cracks near the bolt holes also. It will run with some servicing and cleanup. I would not use it until the bearing can be looked at to see it working freely though. It has been almost 35+ years since I used it on my boat. The hedge trimmer was run also 30 years ago. I know the other hedge trimmer ran also and is someplace in my shop also. That is a yardstick ruler and it appears about 30 inches long.
  3. 1 point
    I love the translation...
×
×
  • Create New...