Jump to content
Sign in to follow this  
Triumph66

Bolens 600 up and running

Recommended Posts

At last I got around to sorting out the 600 which I bought from the States. Ohio to be precise. I replaced the fuel sediment bowl as it was missing the screw. I checked the plug and it was clean and turned it over and then it fired up happily. I let it ran for a wee while to warm it up. I then selected the gears. Nothing happened. Then I remembered I needed to put the cotter pin back in. I gave it a quick run in 1 and 2 and reverse. It was surprisingly nippy and managed to ride over the wood chips fairly easily. I decided to drain the transmission oil and engine oil which I duly did and replaced it with fresh oil suitable for the engine and the transmission. I gave it another run (in fact three runs) around the yard and track. I finally went into third gear and that was really nippy. I them decided enough was enough and put it into neutral and tried to engage another gear. Nothing happened at all. I looked at the belts which were slipping and noticed that one was off the pulleys. I managed to get it back on but still couldn't select a gear. The clutch pedal was down onto the floor and wouldn't come back up. I pushed it back to my storage marvelling at how quiet these 600 are....

 

i think a new new set of belts are in the cards.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...