Anglo Traction 1,016 #1 Posted September 12, 2017 Been prepping a spare Wheel Horse 8 spd Trans to swap with the one in my C-120 to overhaul it- As can be seen, the Key ways are very tidy. The keys weren't bad either, but had some wear. Problem is I have scoured the Web for UK supplier of 1/4" x 1 3/8" Keys using every part and Key number with no luck (Bulk manufacturers do minimum of 100). So I thought I'd ask here if anyone has found, or knows of a supply of good spec that I can obtain from,........ before resorting to making a stock of my own?. (my other Transmissions use a different size). Regards. . Share this post Link to post Share on other sites
C-101plowerpower 548 #2 Posted September 12, 2017 i got mine from a toro dealer, packet of two, not all that expensive Share this post Link to post Share on other sites
HeadExam 1,783 #3 Posted September 13, 2017 Toro part number 937108 https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2053587.m570.l1313.TR0.TRC0.H0.Xtoro+937108.TRS0&_nkw=toro+937108&_sacat=0 Share this post Link to post Share on other sites
Cub Cadet 613 #4 Posted September 13, 2017 http://www.ebay.co.uk/itm/Imperial-Woodruff-Key-Various-Sizes-Packed-in-10-5-2pcs-/302382364118?var=&hash=item466764b5d6:m:mqqgfcQe_DMYFzDxB94gOpA are these any good? 2 HeadExam and Anglo Traction reacted to this Share this post Link to post Share on other sites
Anglo Traction 1,016 #5 Posted September 13, 2017 Mark up for Toro's own Keys makes it uneconomical for me to get from a Dealer here. 3 hours ago, Cub Cadet said: http://www.ebay.co.uk/itm/Imperial-Woodruff-Key-Various-Sizes-Packed-in-10-5-2pcs-/302382364118?var=&hash=item466764b5d6:m:mqqgfcQe_DMYFzDxB94gOpA are these any good? Strange !. Just checked my Eb** search page and They did not show up on it initially Ewan?. I'd found their own Site (keysandpins.com), so thanks for finding that link and I'll file it, also very handy for others here in UK. Choice they offer for that size (1 or 5) is a bit strange? I will probably end up making a few sets myself, as I need some EN8 (C45) Steel for some other jobs, so they can be made from the waste bar end for very little Lathe time/cost. Regards 1 Cub Cadet reacted to this Share this post Link to post Share on other sites