skookum 6 #1 Posted January 1, 2023 (edited) Hi, Just some pics. 485 kg beast with 18 inch rims - 10hp Sachs 2-stroke water cooled diesel 500 ccm - 6 speed forward - 2 speed reverse - 2 pto speeds - differential lock - handlebar adjustment up - as well as 45° sideways possible in 3 positions each. Has front pto with overrunning clutch for front mower. Rear pto shaft = 28mm diameter with 8mm key groove Steering brake on each handlebar side - when both brakes need to be applied simultaneously as when going downhill with trailer, I use the parking brake lever. Units like this should NOT be run without competent trailer brakes in nowadays public traffic - the braking power of the Hummel is less than adequate at Vmax of 12,7 km/h More pics. Trailer hitch attachment rotates internally - so rotational movement of the trailer tongue is thus accomplished. Lube plan riveted to top of hood Edited January 1, 2023 by skookum 2 nigel and Stormin reacted to this Share this post Link to post Share on other sites
skookum 6 #2 Posted January 1, 2023 Sorry - wrong section of the forum - maybe an admin could shift it to the "rotovator section" Share this post Link to post Share on other sites
Stormin 4,458 #3 Posted January 29, 2023 That's some beast and I think it's ok here. Share this post Link to post Share on other sites
Jackson Dom 0 #4 Posted December 6, 2023 Love my Hummel DE52 walk-behind tractor from 1956! Reliable and sturdy, it gets the job done effortlessly. A classic gem for any farming enthusiast. Highly recommended! And don't forget to check out the Boom & Bucket attachment for added versatility. Share this post Link to post Share on other sites