Leaderboard

Since getting my gas tank back from my local radiator shop I sanded it all down with a used piece of 60 grit paper, then put 1 light coat of my primer in post 19 on, then sanded it with a new piece of 220 grit paper to try and get whatever rust pits that were there out, then I put another coat of the primer on, then repeated the process a 2nd and 3rd time then that was all I did. I put a total of 3 coats of primer on.....

I also got my gas tank back from my local radiator shop a couple days ago, and it only cost me $20.00 to have it done and soldered. The repairman who did it said it leaked 3 times, and there was a 3rd hole that needed to be done not just the original 2 like I thought. I asked my stepdad if we could shave the holes down a bit and he said he would leave it alone and not risk doing that and filing it too far and making another hole, so I'll just leave it alone like he suggests. Here is what the tank looks like now.....

Hi everyone, I have a little update on the tractor. My stepdad and I went to the Lebanon Valley Indoor Tractor Expo in PA about 3 weeks ago now, and Lawn And Garden Tractor (L&GT) Magazine was there and I am a subscriber so I renewed my subscription. If you did not know the magazine is teamed up with Hapco tractor parts, so while at their booth renewing my subscription they had a show special on their parts so my stepdad bought me a new steering wheel as a birthday present. The reason he bought it for me was because I was deliberating about it for awhile (as I do with a lot of things) because to me it was the wrong one; it is the correct design but I didn't think it would go on smoothly because it requires a key way like my 10 horsepower has. My stepdad says "I don't think you're gonna find a better deal than that and we can make it work", and took out his wallet. It is a John Deere steering wheel yes, but I will bring it to a machine shop and have them make a key way to fit my steering column...... http://hapcoparts.com/steeringwheel.aspx

Been dog proofing the garden yesterday while we still have some garden left. Erected a fence between it and the yard. I did have some help from Nell, the pup. Rather large pup now. Driving the posts in was fun. When I swung the mallet, she'd jump up and try to grab it and push the post with her paws. The hole for the post by the house proved a bit of a problem. A piece of the original drive was still there under the soil. Four inch thick. That I attacked with a large chisel and lump hammer. After about an hour and a half and an aching wrist, I managed to get through concrete and the post in. Then fitted the last panels. Not bad for an afternoons work. I only collected the posts in the morning. Fitted the gate first thing this morning.