Jump to content

Dibnah

Members
  • Content Count

    31
  • Joined

  • Last visited

Everything posted by Dibnah
 
 
  1. Dibnah

    Dibnah

  2. AWESOME, THE DIARRHOEA DRAGSTER! Top work.
  3. I have a new adjustable sprung seat that would look perfect on that Mark, F.O.C if you can collect.
  4. Fuel pipe ran underneath Nathan and was sheathed in a pipe, I removed it as it had rotted.
  5. Well done Nathan - get yourself a pump I have some cylinders =BULLDOZER.
  6. Replacement plough discs can be made from old circular saw blades- grind or cut to required diameter and are very hard wearing.
  7. I will take a look through them for you.
  8. The Ransomes plate has it as Mg40- The Ransomes register has it as a Mg40, I have a photo of the plate with serial no and designation (mg40) which I took when researching it. It only matters to members of the site who may need reference to info regarding an Mg40 who wont find it under Mg6. If you post a photo of the plate on the machine would this help. Id no is 15295.
  9. Im Happy to make him a front axle but that would look better with rear tracks and large wheels up front and a tipping back.
  10. looks like my projects are on hold again---- stuck an axe in my right palm on Monday-- in Feb I cut my thumb off on the bench saw so its advice only I'm afraid Nathan!
  11. Sorry to let her go but Widestride still needs finishing, its in good hands with Nathan.
  12. Two large boxes of ------ David Brown manuals
  13. From the album: Widestride

    © Dibnah

  14. Dibnah

    427 (640x480)

    From the album: Widestride

    © Dibnah

  15. From the album: Widestride

    © Dibnah

  16. Dibnah

    424 (640x480)

    From the album: Widestride

    © Dibnah

  17. A 114 of them Neil, Dated from 60s to 80s from the Wheatley Hall factory Doncaster.
  18. That's just a few of the boxes Norm, I.H and Case tractors loaders crawlers and wheeled shovels. Field Marshall stuff to go through next.
  19. Dibnah

    Trans id needed

    Im thinking its mower transmission- possibly from an early Wolsey mower - take a look at the Wolsey thread and compare by ignoring the hydro unit.
  20. Some of a recent find- yet to catalogue them 04.JPG]
  21. Dibnah

    C-120 refurb.

    Hi Norm, run a bead of weld around the groove in the outer race- this will shrink it and will tap out.
 
×
×
  • Create New...