jparkes43

ok i will have a look. i got the choice of one out of Juliette or one out of a push mower there the only two plugs i got, which one do i try. james

OK. i am literally done with this thing after a carb teardown, thorough clean and put back together and the settings all corrected i am still having no luck i am still at the same point as i was yesterday i tired a variation throttle/choke positions AND fuel mixtures. I am out of ideas. Please help james

hello i did decide to take apart the carb and clean it a bit and heres where i am at. but i still need further help james some people have said about blowing out the everything with an air compressor?

Hello, so today i took the carb off and took some good pictures for you guys, any advice on cleaning like what do i do etc image is unclear but it reads 3589H2 i beleive 40 james

yeah i love gold old bendy shes great. james

ok full throttle no choke (note taken) ok it did sort of rev and die and it was very few and far between. but yes ok keep going on the starter fluid james

hello ranger that is what i did this morning and still didnt make any difference. oh ok so once it runs keep on putting it in i might do that tommorow. i will definitely try this and get back to you. james

thanks i will take a look. james

looks very cool. nice tractors and pictures james

ok, i didn't even know that was an option. got a link? james

thanks anglo great information. i will get back to you on that tomorrow. but i might look into those kits. also i might add it does have very very slight moisture around the bottom of the carb. but thanks on the float i may be interested. thanks koen will do, the problem is i want to run the engine to adjust the carb right but cant even do that as it wont run james

yes living up to the troublesome tecky name. i have done no work apart from fiddling with the carb and a new spark plug. that was my idea aswel. no i did look in my manual but cant find much. i will let you know on my numbers as soon as i can. also i have set my carb to the settings i found on the internet but it still doesn't solve it. ok well where you are isn't to far away so its a possibility thanks anyway james

hello, no i hadn't tried that but it does spark i know that and also its not it wont rev its just it wont even stay running even on idle. james

Hello. As some of you may know i am restoring my 1968 wheel horse lawn ranger and it has a 6hp tecky h60 in it. now no matter what i try it will not run, well it ill sort of start and maybe run for a few seconds but will never stay running. i have tried adjusting the carb and using different amount of throttle and choke etc but still no luck. yes i have fresh fuel. any help is greatly appreciated. And it has a brand new spark plug, also it makes no difference if you are running and air filter or not, also after trying for a while it starts to pop and spit slightly out the carb is this something i should be worried of? also as a long shot for you uk guys i don't mind if you are nearby want to come in a help out, or i don't mind going to your place if you aren't to far away to see if you can help maybe for a weekend like i don't mind traveling if you offer for help and i will bring it down. thanks ​ james

nice one tom, that will keep you busy! james

ha ha i will get a driving video soon when i have some one to film it with me james hopefully there will be the next video on sunday james

why? james

video is now live! james

My nitrous kit came today and i got to make a video of it running and activating the nitrous, there is a slight power gain and a ever slight speed increase, i need to tune the carb to make the most of it but even with a normal setup it seems a good idea. its not the best upgrade i have done but it looks goos and actually does work!!!! a video of it driving will be out soon!! james

it was such a shame that today there was a lesson on when i wanted to use the sand blaster so only one half of one split wheel. but at least that is done, and i got the two tubes in the two front tyres so i can test fit them. james

oh it was in a bit of a state. not doing the valves? i thought that would be important. good luck james

steering?

i had a struggle getting them of with no machine because ours was to large. me and my friend with 3 levers and some weight and elbow grease in the heat manged it so we can mange it again with some soapy solution. at least the fronts will be ok james

some kinda shaft? drive shaft? did the force of pulling things break it?

i am prepping them tomorrow, and priming and painting them hopefully tomorrow. so you will see them looking good soon. then tyres on james