bankman 17 #1 Posted January 10, 2015 I aquired this a few years ago, basically to save it from being scrapped. My intention was to restore and show it but I have too many things going on in my life to spend time on it, plus it is too large for me to transport it easily, so I have decided to pass it on. As you can see it is rough, it has had a 'modification' done to the rear end as well at some time. Now the machine is partly dismantled, the engine has had the barrel removed and I have refaced the valve seats but I gave the valve's to a clubmate to reface them and he appears to have lost them so new ones will be required. Of course the engine will need a total rebuild anyway. The Albion gearbox apppears OK, not sure what (if any) parts are missing from the whole machine but whatever was on it when I obtained it is still there but probably now in a box! One tyre still hold air, the other is split though. Anyone interested would need to collect it from Matlock, Derbyshire, and give me a day or three to get everything together as it is spread over a garage, bedroom and a container on a local farm at present! It cost me £15 a few years ago, so I haven't lost much by giving it away. I could sell the engine for parts and make that back but that isn't the way I work. PM me if interested and thank's for looking. Pete. 1 Triumph66 reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #2 Posted January 10, 2015 Looks a nice bit of kit for someone, I daren't jump in... Too many projects Share this post Link to post Share on other sites
Triumph66 1,256 #3 Posted January 10, 2015 Bankman, A good project for someone. Good of you to give it away and I hope it go to an enthusiast. Share this post Link to post Share on other sites
bankman 17 #4 Posted May 7, 2015 Just bumping this up again as it is still available either as a 'project' or for parts. Pm me if interested. Pete. Share this post Link to post Share on other sites
WeaPea 15 #5 Posted May 31, 2015 I always want too many projects, but if you can somehow move this project to here Finland, i am interest ! i guess it will be impossible, or too expensive. Share this post Link to post Share on other sites
diggerjames 543 #6 Posted June 1, 2015 Hi pete is this lovely machine still available cheers James Share this post Link to post Share on other sites
bankman 17 #7 Posted June 2, 2015 Hi James, yes come and take it away before I scrap it as space is needed urgently. Have messaged you. Pete. Share this post Link to post Share on other sites
tony 0 #8 Posted June 6, 2015 Hi I have a few of these, and 2were burned on my allotment. It is a long way bit I would love to have it if you are still offering Share this post Link to post Share on other sites
