Lauren1985 6 #76 Posted June 2, 2023 (edited) Old Thread But Highly Relevent. !!! Just acquired a Hayter 21 Serial 016 5 Hp Briggs 132922 1989 engine needed a new clutch (reason it was dumped in the hedge) It runs great Lauren Edited June 2, 2023 by Lauren1985 4 Anglo Traction, Stormin, riber3 and 1 other reacted to this Share this post Link to post Share on other sites
riber3 4 #77 Posted June 2, 2023 That's an impressive cut!!! 1 Lauren1985 reacted to this Share this post Link to post Share on other sites
Anglo Traction 1,016 #78 Posted June 2, 2023 Well saved there!. Glad to see ths Topic is still useful. 1 1 Lauren1985 and riber3 reacted to this Share this post Link to post Share on other sites
Lauren1985 6 #79 Posted June 2, 2023 3 hours ago, Anglo Traction said: Well saved there!. Glad to see ths Topic is still useful. Perhaps we need a sub page :-) for Old Hayter machinery :-) 1 Steve in France reacted to this Share this post Link to post Share on other sites
Lauren1985 6 #80 Posted June 6, 2023 Best budget tyres for a 21 ? Share this post Link to post Share on other sites
Steve in France 1 #81 Posted June 6, 2023 I bought these...fit perfect. https://www.tyre-and-tube.co.uk/410350-6-tyre-mobility-wheelbarrow--cart-tire-1126-p.asp?v=0&variantid=1128 On 6/2/2023 at 1:05 PM, Lauren1985 said: Old Thread But Highly Relevent. !!! Just acquired a Hayter 21 Serial 016 5 Hp Briggs 132922 1989 engine needed a new clutch (reason it was dumped in the hedge) It runs great Lauren Hi Lauren, can I please ask, where did you get your clutch from? thanks. Share this post Link to post Share on other sites
Lauren1985 6 #82 Posted June 6, 2023 9 minutes ago, Steve in France said: I bought these...fit perfect. https://www.tyre-and-tube.co.uk/410350-6-tyre-mobility-wheelbarrow--cart-tire-1126-p.asp?v=0&variantid=1128 Hi Lauren, can I please ask, where did you get your clutch from? thanks. A friend that has a lawnmower repair/sales business found one in the cobwebbed area of the parts store lol. There are a few new ones online but why not buy hew linings and epoxy the pad to the disc. https://www.autoandindustrial.co.uk/clutch-facings-in-various-materials/ Share this post Link to post Share on other sites
Lauren1985 6 #83 Posted June 26, 2023 what is the cutter belt size on the 21 please Lauren Share this post Link to post Share on other sites
Anglo Traction 1,016 #84 Posted June 26, 2023 Can't give you the belt size, but the part number from the manual is 2348. An online search for hayter 21 part number 2348 throws up several outlets to obtain one. Here's an example- HAYTER 21 2348 1 Lauren1985 reacted to this Share this post Link to post Share on other sites
Anglo Traction 1,016 #85 Posted September 4, 2023 Just for everyone's information. I have uploaded the available manual in PDF form for the Hayter Osprey and 21 machines. It's in the orange header line marked DOWNLOADS. Engine data will need to be obtained from the B&S website. Regards 1 1 Lauren1985 and Chris 129 reacted to this Share this post Link to post Share on other sites
Chris 129 0 #86 Posted July 7 On 9/12/2015 at 8:24 PM, Anglo Traction said: Ok, If it is an Osprey and 7hp, then I can offer you some help. The Engine Model, Spec and Serial nbrs on the Engine (1980) in my original Thread is 170702 - 5638-01. If you want to check further, then just count the number of Cylinder Head Bolts. If you have 9, then it should be 17cu inch 7hp............... A 5hp (14 cu in) engine has 8. I have PDF Files of both the Illustrated Parts Manual and User Manual that I can post here or send. Or, you can enter the numbers into the Briggs and Stratton Website Manuals section and download your own. The User Manual has most of the common service procedures and Data you'll need. Any other bits you need, I can check my Manual for you. Would it be possible to get the manuals at all? I know it's an old post but I would be very interested for my 7hp osprey 24 Thanks Chris Share this post Link to post Share on other sites
Lauren1985 6 #87 Posted July 7 Not to be pedantic but the 5HP engine is a 13 cubic unit (12.6) to be precise ie 206cc engine. Share this post Link to post Share on other sites
NickBacon 0 #88 Posted July 15 I am a new Hayter Osprey owner having snapped up one that was for sale in the next village to us and of course the usual internet search for information was initiated soon after collecting the 'Beast'. Hence finding this forum. As far as I can tell a previous owner replaced the original engine with a 12hp version and that seems to have serious grunt. The clutch friction material was pretty well worn down but I managed to find Custom Brakes and Hydraulics in Sheffield and sent them the clutch plates and they sent them back with new friction material bonded on, more or less by return of post. This is what I have bought and already it has more than earned the modest purchase price by clearing overgrown parts of our paddock. Share this post Link to post Share on other sites
Lauren1985 6 #89 Posted August 15 I need the bearings for the cutter deck. I have tried greasing them and they get hot :-( Its HA2384 or HY2384 ? Share this post Link to post Share on other sites
Lauren1985 6 #90 Posted August 16 On 7/15/2024 at 1:49 PM, NickBacon said: I am a new Hayter Osprey owner having snapped up one that was for sale in the next village to us and of course the usual internet search for information was initiated soon after collecting the 'Beast'. Hence finding this forum. As far as I can tell a previous owner replaced the original engine with a 12hp version and that seems to have serious grunt. The clutch friction material was pretty well worn down but I managed to find Custom Brakes and Hydraulics in Sheffield and sent them the clutch plates and they sent them back with new friction material bonded on, more or less by return of post. This is what I have bought and already it has more than earned the modest purchase price by clearing overgrown parts of our paddock. I will be intrigued on how long the cutter deck belt lasts. I have an 11.5 21a807 0168 e1 ohv intek I want to try on it lol. I don't have all the clutch parts. I push it manually 🥵🥵🥵 Share this post Link to post Share on other sites
