Ph0en1x_uk 3 #1 Posted May 19, 2020 Hi all, I would like to test the waters regarding the Ransomes MG2 Flywheel. I am aerospace design engineer by trade and run a small engineering company in the UK with several CNC machines. Although I am an MG5 owner, it has come to my attention that the MG2 flywheel is prone to failure. Neil Jarret has kindly posted me one to inspect, and with his knowledge I am pleased to say that we have an accurate 3D CAD model and engineering technical drawing. I am therefore proposing running a small batch of these, however, before I do so I would like to gauge the level of interest & commitment from the market place. The last thing I want is shelf full of MG2 flywheels on my hands for years to come. So, if you are interested, then please post or comment below. I will then take your details and add you to the list to effectively 'reserve' one for you. Flywheels will be manufactured from EN8 Steel and Clear Zinc Passivated. Price: £194.95 each. All items are manufactured in the United Kingdom. 3 Triumph66, Stormin and Cub Cadet reacted to this Share this post Link to post Share on other sites
expeatfarmer 591 #2 Posted May 20, 2020 Impressive piece of work between you, fair price for the work and material involved good luck with them I know some MG2 owners will be delighted to get one . Share this post Link to post Share on other sites
Ransomes256 18 #3 Posted May 24, 2020 We need to get some serious commitments to order these before we could consider manufacture due to the set up costs. If you do think you need a flywheel please do not sit back and wait for them to be available as currently it appears there is not enough demand. Share this post Link to post Share on other sites
