? Orline Chicken Power Bike Engine

[Cali 0]

[Wallfish 698]

That's a newer style Chicken Power. Used to power a bicycle on the front tire but you're missing some pieces.

Is that the ?

[Cali 0]

Can u tell me what all im missing and the moters froze i broke the pull cord trying to get it to turn

[Wallfish 698]

It could be the gearbox that's locked up. The old grease inside them gets hard as a rock.

You will need to disassemble the engine and gearbox to find out which it is.

Here's an older engine chicken Power thread which shows the parts. Yours is a newer engine so the gas tank would be different but the frame that mounts to the bicycle fork is basically the same

 

[Cali 0]

I have taken the entier thang apart and can't find eny reason for it to be froze the greese is ok in gear box I paid 25bucks is that a good deal 

[factory 487]

 

The starters are really fragile, forcing them to try & turn a stuck engine or gearbox will usually end up with a broken starter spring or cord.

If the engine is stuck, add a teaspoon of oil to the inside of the cylinder & leave it for a few days or a week, then remove the starter housing and try turning the engine with the flywheel, I've freed many this way, including one where someone stuck a hole through the piston trying to hammer it.

Another thing to note, never unscrew the cylinder if the piston is stuck as a broken con-rod will be guaranteed.

 

The missing parts are the air cleaner assembly, gas tank, twist grip throttle control and the bike mounting kit.

 

$25 is a bargain, they normally sell for $100+ for an average condition one,  to a lot more for mint boxed ones.

 

David

[factory 487]

Starter rebuild info for the model 13B engine here;

 

This shows the bike mounting kit & other parts, the mounting kits were supplied with a selection of different parts to suit different bike frames.

 

The parts list for the earlier version with standard O&R exhaust & engine mounted gas tank.

 

David

[CNew 404]

On 9/28/2020 at 5:30 PM, Cali said:

I have taken the entier thang apart and can't find eny reason for it to be froze the greese is ok in gear box I paid 25bucks is that a good deal 

wow, $25 is a steal - nice find!

[Cali 0]

12 hours ago, factory said:

 

The starters are really fragile, forcing them to try & turn a stuck engine or gearbox will usually end up with a broken starter spring or cord.

If the engine is stuck, add a teaspoon of oil to the inside of the cylinder & leave it for a few days or a week, then remove the starter housing and try turning the engine with the flywheel, I've freed many this way, including one where someone stuck a hole through the piston trying to hammer it.

Another thing to note, never unscrew the cylinder if the piston is stuck as a broken con-rod will be guaranteed.

 

The missing parts are the air cleaner assembly, gas tank, twist grip throttle control and the bike mounting kit.

 

$25 is a bargain, they normally sell for $100+ for an average condition one,  to a lot more for mint boxed ones.

 

David

If i can get it unseized what do u thank its worth do u thank someone might trade me for a newer bike moter maybe is it verry sought after