Stormin 4,458 #1 Posted April 28, 2021 I've been making a couple of attachments for the Sears/Roper recently. First was a front tow hitch out of some scrap lying around. May not look pretty, but functual and cheap. Secondly a rack for the rear of it. I did make a tote box for the front to carry my chainsaw etc, but on really rough ground it would hit large bumps or ground out on deep holes. So I decided to make a rack to carry it behind the seat. Again made from scrap and an old scrap gate. Box trial fitted. Finally some paint thrown on with a brush. Later I had an idea. I was bored BTW. A seat was lying on the shelf, so let's fit it to the rack. Not ideal but good for a laugh. Certainly strong but best not pull any wheelies. 5 Maxwell-8, Anglo Traction, Alan and 2 others reacted to this Share this post Link to post Share on other sites
Alan 1,273 #2 Posted April 28, 2021 I think you should have supplied Carol with seat belts, a parachute, and an eject mechanism Norm. Especially with you driving. Mods look good though. 1 Stormin reacted to this Share this post Link to post Share on other sites
