Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 06/16/2021 in Posts

  1. 1 point
    Hi all, it's about time I put this lathe re-power thread up. I first mentioned it a long time ago in this This Thread . For some reason I did not take any photo's of the build, so all the pic's you see have been grabbed for video footage, which means sometimes the pic's are not as sharp as they could be... sorry.. Before I moved out of my old workshop, i stripped down the treadmill leaving only the parts I needed... The motor and all the wiring/circuit boards.. And the control panel.. A closer look at the motor. 1.25 HP, but 180 volts DC which means I have to use the electrical gubbings that powered it in the treadmill.. So the question is... How do I get power from this little ribbed pulley... To this big pulley on the lathe First lets make a mock motor with direction of travel, as it's much lighter than trying to hold the real thing in place.. The easiest place to mount it would be on the wall above the lathe, but making something to tension a drive belt could be awkward! Also mounting the "speed change pulleys" would be fun as it would have to sit somewhere in the catch tray.. Somewhere about here.. Despite the amount of space it would take up behind the lathe, I decided to go with the mounting system I made for the lathe years ago. Here's a view from the back when the lathe and I were still at the nursery workshop.. Thankfully I can make it a bit less "hangin out da back" or else I'd have to cut a hole through the wall in my new Workshack! It used to pivot on the back of the bench on this steel rod. The trouble was I'd cut one of the hinge brackets off to make the lathe bench easier to move to my new Workshack! Never mind. let's lighten it a bit and cut off an unneeded bit in the saw.. One broken blade later... But after some more of this.. It finally came off. Leaving this odd small bit of box sticking out.. Sooo, out a new tool came
  2. 1 point
    How how does my new toy perform? Not bad at all It still needed a bit of hitting.. And wiggling! Back to the back and time to sort out this hinge problem.. A quick bit of marking out. Small drill.. A bigger drill... Don't you just hate it when this happens? So I finished it by hand with a step drill... very handy things A bit of trimming and a couple more holes and with it bolted on the hinge repair was done... Now I know this is steel on steel, but as I don't have to change "speeds by belt" that often there will be very little ware.. Whilst I was down that way, I bolted the "belt tension arm" back in place. The "beltey tiltey bit was fitted on.. Sorry about the naff pic. And this little collar stops it from moving side to side. Loads more to come, so tune back at some point for more..
  3. 1 point
    Now may be a good point to drop in Vid No 1
  4. 1 point
    Ian

    Southbend Lathe Tool Holder

    Thanks Alan, it's good to be back.. I'm not sure how crazy my builds will be, only smaller stuff these days.. But still fun to make Thanks Norm, yeah it has been a while, life has/had been on hold since Covid popped up! Hi Ray, don't be envious, have a go yourself.. I'm self taught, no training what so ever... Liking a challenge helps as well
  5. 1 point
    Rayp

    Southbend Lathe Tool Holder

    I wished I hadn't watched - it just made me even more envious of your skill.
  6. 1 point
    Stormin

    Southbend Lathe Tool Holder

    Brilliant job, Ian. And good to hear from you.
  7. 1 point
    Alan

    Southbend Lathe Tool Holder

    Good to see you back Ian. Now we need to see more of your crazy builds.
×
×
  • Create New...