Jeroenw114

This is my Maruzen drilling machine. It's fully restored, all correctly, carburetor overhaul kit, new gear grease etc.
After that I put it on the shelf. I like to look at it but that's all I do.
Now I decided that if someone would offer an far better place for this machine it's better that way.

Very rare, try to find one with google! (if you do find more, let me know!)
There were 200 imported to Europe in '85 or '86.
It runs fine, this was this weekend. https://www.dropbox.com/s/6m1l1wg8d26jedf/20170618_165723.mp4?dl=0
I would like to ask $200.
I live in the Netherlands.
What sending costs depends on the country, ask and I will try to answer.
Sending to the US costs $60 so an total of $260 send. (signed for)
Sending to the UK costs €25 (signed for)
I have also a Drillgine that I was restoring. The engine and drill part is nice again, it needs painting and reasembling. Send me a PM when interested.
 

 

 

 

 

 

 

 

 

This is my Maruzen drilling machine. It's fully restored, all correctly, carburetor overhaul kit, new gear grease etc.
After that I put it on the shelf. I like to look at it but that's all I do.
Now I decided that if someone would offer an far better place for this machine it's better that way.

Very rare, try to find one with google! (if you do find more, let me know!)
There were 200 imported to Europe in '85 or '86.
It runs fine, this was this weekend. https://www.dropbox.com/s/6m1l1wg8d26jedf/20170618_165723.mp4?dl=0
I would like to ask $200.
I live in the Netherlands.
What sending costs depends on the country, ask and I will try to answer.
Sending to the US costs $60 so an total of $260 send. (signed for)
Sending to the UK costs €25 (signed for)
I have also a Drillgine that I was restoring. The engine and drill part is nice again, it needs painting and reasembling. Send me a PM when interested.
 

 

 

 

 

 

 

 

 

This is my Maruzen drilling machine. It's fully restored, all correctly, carburetor overhaul kit, new gear grease etc.
After that I put it on the shelf. I like to look at it but that's all I do.
Now I decided that if someone would offer an far better place for this machine it's better that way.

Very rare, try to find one with google! (if you do find more, let me know!)
There were 200 imported to Europe in '85 or '86.
It runs fine, this was this weekend. https://www.dropbox.com/s/6m1l1wg8d26jedf/20170618_165723.mp4?dl=0
I would like to ask $200.
I live in the Netherlands.
What sending costs depends on the country, ask and I will try to answer.
Sending to the US costs $60 so an total of $260 send. (signed for)
Sending to the UK costs €25 (signed for)
I have also a Drillgine that I was restoring. The engine and drill part is nice again, it needs painting and reasembling. Send me a PM when interested.
 

 

 

 

 

 

 

 

 

This is my Maruzen drilling machine. It's fully restored, all correctly,  carburetor overhaul kit, new gear grease etc.
After that it ran and I put it on the shelf. I like to look at it but that's all I do. My interest does lies more with antique and modern firearms. This was an excess for me.
Now I decided that if someone would offer an far better place for this machine it's better it goes there.

Very rare, try to find one with google! (if you do find more, let me know!)
There were 200 imported to Europe in '85 or '86.

As said, it ran, it does not on this moment. It runs when I put a little gas in the spark plug hole. Ignition is fine.
But it does not get petrol on it's own. I think the carburetor needs cleaning.

https://www.dropbox.com/s/hiqwey9pvoyexmk/Maruzen.mov?dl=0

I would like € 225 / $225 or good offer.
I live in the Netherlands.
What sending costs depends on the country, ask and I will try to awnser.
Sending to the US costs €58
Sending to the UK costs €25
 

 
 

This is my Maruzen drilling machine. It's fully restored, all correctly,  carburetor overhaul kit, new gear grease etc.
After that it ran and I put it on the shelf. I like to look at it but that's all I do. My interest does lies more with antique and modern firearms. This was an excess for me.
Now I decided that if someone would offer an far better place for this machine it's better it goes there.

Very rare, try to find one with google! (if you do find more, let me know!)
There were 200 imported to Europe in '85 or '86.

As said, it ran, it does not on this moment. It runs when I put a little gas in the spark plug hole. Ignition is fine.
But it does not get petrol on it's own. I think the carburetor needs cleaning.

https://www.dropbox.com/s/hiqwey9pvoyexmk/Maruzen.mov?dl=0

I would like € 225 / $225 or good offer.
I live in the Netherlands.
What sending costs depends on the country, ask and I will try to awnser.
Sending to the US costs €58
Sending to the UK costs €25