Transaxle

[Jack rush 0]

Hi ive got a peerless 800 gearbox and i have rebuilt it but as i tighten the casing the differencial axle tightens likely to be a cog/sprocket not sitting right and or washer in the wrong place has anyone got a photo of the inside of the gearbox please thanks in advance

[the showman 4,074]

Try this Jack, it should cover yours.

http://www.wheelhorseforum.com/files/file/2087-transmission-gear-peerless-sm-01-02-691218pdf/

[Jack rush 0]

Thanks mate (the showman) that helped lastly i need a detent ball for my gear selector in the transaxle i can only find them in the usa and its like 30 pound shipping so looking for one in the uk this is the part number (792077A) thanks 

[Stormin 4,458]

You may be able to use an old ball bearing out off a ball bearing. If you can find one small enough.

[Wristpin 400]

The most common problem is incorrect positioning of one of the bushes with locating " nibs" not sitting in theit cut outs in the casings. 

[meadowfield 1,900]

35 minutes ago, Wristpin said:

The most common problem is incorrect positioning of one of the bushes with locating " nibs" not sitting in theit cut outs in the casings. 

 

got the t shirt there

[Jack rush 0]

Thanks anything more on the detent ball

[Anglo Traction 1,016]

What size of Ball is required?. I have an assortment of fractional inch sizes in Steel, Stainless and Phosphor Bronze, all precision finished. Size range from 1/16" to about 5/16" I think....some bigger. If I have what you need, I can help you.

[meadowfield 1,900]

from the ones I've split they are around 1/4" - but more likely 5/16" (just under 8mm)