Wallfish 698 #1 Posted February 18, 2019 Bought this as a bunch of pieces but it has all the important stuff like the gearbox with the pulley, the little V-belt, correct gas tank, ect. ect. Really just missing the engine, hardware and couple of small pieces. The locked up gearbox is soaking now but it seems like it's just the grease is hard as a rock. It should free up. It came in dirty but was easy to clean since it was already apart. Paint isn't too bad on this one. I have a couple of spare yellow Mustang chainsaws to use for donor parts, engine and the hardware. Missed out on a couple of these over the years and they don't seem to come up for sale as often so was happy to finally get one for the collection. 2 factory and pmackellow reacted to this Share this post Link to post Share on other sites
CNew 404 #2 Posted February 18, 2019 That’s a pretty cool cut-off saw. I’ve only seen one of those come up for sale. It was maybe a couple months ago and I almost jumped on it. Nice find! Share this post Link to post Share on other sites
pmackellow 2,738 #3 Posted February 18, 2019 Well done, that will be a nice addition to your collection ! Share this post Link to post Share on other sites
factory 487 #4 Posted February 18, 2019 17 hours ago, Wallfish said: Missed out on a couple of these over the years and they don't seem to come up for sale as often so was happy to finally get one for the collection. Good to hear you have finally found one for your collection, strange that someone borrowed the engine, as the rest of the parts look in good condition, good luck with the restoration. 15 hours ago, CNew said: I’ve only seen one of those come up for sale. It was maybe a couple months ago and I almost jumped on it. Nice find! Probably was the one you mentioned by PM in January, they don't appear very often. David Share this post Link to post Share on other sites
CNew 404 #5 Posted February 18, 2019 Yes, that very well could be the one. I’ll have to ask Wallfish Share this post Link to post Share on other sites
Wallfish 698 #6 Posted February 19, 2019 It was on Epay as a "buy it now" for $85. Came from a seller in Waltham MA and that guy has been listing O&R stuff on there for a while. Need to get him to join the forum as it appears he has or had a bunch of stuff. Share this post Link to post Share on other sites
CNew 404 #7 Posted February 19, 2019 Too funny, yes that was the one. Just as I was getting ready to bid it ended- glad you were the one that ended up with it! I’ve bought a few parts and I think the Landscaper 600 engine from him as well. Share this post Link to post Share on other sites
Wallfish 698 #8 Posted February 19, 2019 Beat ya! 1 factory reacted to this Share this post Link to post Share on other sites
CNew 404 #9 Posted February 19, 2019 Ha ha, yea to make things worse I actually knew about it before he listed it as I was communicating with him on some other stuff so I had a heads-up and I still missed it. I was also still pretty green about all the O&R stuff at that point too and didn’t know what things were rare... glad it went to a proper home! Share this post Link to post Share on other sites
factory 487 #10 Posted February 19, 2019 9 hours ago, Wallfish said: Came from a seller in Waltham MA and that guy has been listing O&R stuff on there for a while. Need to get him to join the forum as it appears he has or had a bunch of stuff. Unfortunately I now realise which seller it came from too, I'm not sure they actually collect O&R's at all, but they have been very busy buying up most cheap O&R's over the last two years and then either immediately relisting them at a much higher (one item I noticed was even listed with the previous owners pictures before they could have received it), or parting them out to sell the engine, tanks & other bits separately (i.e many Chicken Power kits, chainsaws & even a rare Polaris snow blower ), often the engines are then repainted & incorrect decals attached for the type/age of engine. I think this may also be one of the reasons why asking prices have been all over the place & often quite silly, also completed listings on ePay don't give the lower sold price when something sells at a lower 'best offer' price either (which artificially raises asking prices). Looking at the listing it states "all parts are there to build the chop saw, only took out the old engine" so I'm guessing it was a complete saw before they bought it, if they had more knowledge they would have realised it's higher potential value as a complete item. But then again it helped you find one at a very good price, as we both know an engine to complete it isn't too expensive. I'm looking forward to seeing the chop saw back to how it should be. David Share this post Link to post Share on other sites
factory 487 #11 Posted February 19, 2019 I suspect Wallfish may already have this information, but here are some scans I've done of parts diagrams for the chop saw & the type 218 engine (I do have it in higher resolution, but wanted to keep the file size lower for the forum). Ohlsson & Rice Circular Saw Jan 71 & type 218 engine Sep 68.pdf David Share this post Link to post Share on other sites
Wallfish 698 #12 Posted February 20, 2019 4 hours ago, factory said: I suspect Wallfish may already have this information, but here are some scans I've done of parts diagrams for the chop saw & the type 218 engine (I do have it in higher resolution, but wanted to keep the file size lower for the forum). Ohlsson & Rice Circular Saw Jan 71 & type 218 engine Sep 68.pdf David I'm not sure if that one is in my book or not. Don't recall seeing it but it's certainly been a while too Share this post Link to post Share on other sites
factory 487 #13 Posted February 20, 2019 Hope it's useful to you either way, it's sure to help anyone else who may need it too. The service folders are all a little bit different, depending on whether the repair shops bothered to get the updates or not, plus bits seem to disappear from them. I scanned all the pages of the first one I bought when I was off work for a long term (due to my health). Since then I have acquired a second later one, but there is the odd item missing that contents page lists, I'm slowly scanning that one too (apart from duplicate pages). Scanning them is the easy bit, editing & creating smaller sized pdf files from the PNG images takes a long time. Finding a service book that covers the earlier stuff in more detail & that goes all the way to the end of AEP in 1978 would be fantastic. David Share this post Link to post Share on other sites
CNew 404 #14 Posted February 20, 2019 David, Do you by chance have any of this kind of information or technical bulletins for the following tools: Tote’n Comet Circular Saw, Drillgine or Orline Hedge Trimmer? Clint Share this post Link to post Share on other sites
factory 487 #15 Posted February 20, 2019 I don't have anything for Comet tools or the Drillgine, but I was going to surprise you with some stuff for the Orline hedge trimmer, oh well you know now. It's already scanned, just needs a bit of editing. If you could let me know which engine type is fitted I can add the correct parts diagram for you too. David Share this post Link to post Share on other sites
CNew 404 #16 Posted February 20, 2019 David, That’s awesome - I really appreciate you going to all that effort! It’s always so helpful to have some of the exploded views to know what you’re getting into along the way. The engine type on my Orline trimmer is a Type 224. Much appreciated- thanks! Clint Share this post Link to post Share on other sites
factory 487 #17 Posted February 21, 2019 On 2/20/2019 at 8:08 PM, CNew said: The engine type on my Orline trimmer is a Type 224. Now added to the appropriate thread; David Share this post Link to post Share on other sites
Wallfish 698 #18 Posted November 12, 2019 Well, it only takes about 9 or 10 months to do something which used to get done in a day or two. Finally got around to and made some time to assemble this cutoff saw. It's not 100% done as I need to make a grommet for the carb intake to match up with the hole for the air cleaner and I'll install a new carb while I'm at it. Still need to order a new blade too and do some clean up on it. Used to be able to go through these quickly but didn't look for the specialty tools I made for easier access to the tough to reach bolts an such. Luckily the recoil went fast and got that the first try. 4 pmackellow, factory, CNew and 1 other reacted to this Share this post Link to post Share on other sites
CNew 404 #19 Posted November 12, 2019 Very nice, those cutoff saws are a nice compliment to the chainsaws! Share this post Link to post Share on other sites
factory 487 #20 Posted November 12, 2019 That looks very nice now and it's great to see the original paintwork in such good condition too. David Share this post Link to post Share on other sites
CNew 404 #21 Posted January 1, 2020 On 11/11/2019 at 6:33 PM, Wallfish said: Still need to order a new blade too and do some clean up on it. Wallfish, Were you successful finding a new blade or a NOS blade that fits well for this saw? Share this post Link to post Share on other sites
Wallfish 698 #22 Posted January 2, 2020 Haven't yet 1 CNew reacted to this Share this post Link to post Share on other sites
Wallfish 698 #23 Posted January 2, 2020 Here's an 8" cut off wheel. A 9" wheel may fit but only found them in packs of 25 https://www.grainger.com/product/4DDV1?cm_mmc=PPC:+MSN+PLA&s_kwcid=AL!2966!10!8973609365!1102900021209&ef_id=Ws1eMQAACx4pkpJ_:20200102222937:s Did you score a cut off saw Clint? Where's the pics? Share this post Link to post Share on other sites
CNew 404 #24 Posted January 3, 2020 As a matter of fact I did I haven’t received it yet, could be another week or two before it arrives. Will definitely post some pics as soon as it shows up. Share this post Link to post Share on other sites
JUST O&R 237 #25 Posted January 3, 2020 We definitely need some pic's when you get it . just found this on ebay don't know if and one is interested . seems a little high to me! www.ebay.com/itm/Vtg-NOS-Ohlsson-Rice-OR-Engine-Chicken-Power-Bicycle-Parts-Lot-Coil-Petcock-Etc/202867797676?hash=item2f3bdceeac:g:UJoAAOSwydNeDgdZ Share this post Link to post Share on other sites
