Drumnagorrach 9 #1 Posted November 20, 2020 Is there anyone in the UK who re magnetise flywheels ? 1 Triumph66 reacted to this Share this post Link to post Share on other sites
Wristpin 400 #2 Posted November 20, 2020 I believe that Villiers Services do. No personal experience of them. Share this post Link to post Share on other sites
Stormin 4,458 #3 Posted November 20, 2020 Try Meetens at Preston. They may be able to help. Google for their details. Share this post Link to post Share on other sites
Drumnagorrach 9 #4 Posted November 20, 2020 Initially , I couldn’t get a spark out of the Kohler K91 fitted to my Allen Scythe . ordered a new coil from China , couldn’t find one in UK . It turned up today and didn’t fit , the square hole through the middle is only 10 mm across flats and should be 12.5 . Being fairly annoyed , I had another go at getting a spark and after stoning the points and cleaning them again I noticed a weak spark when I spun the engine over fast with my rattle gun , put it all back together and it started, loads of blue smoke but pulled in the drive lever and it lurched off . i bought it ti cut the rushes that are invading our land because the strimmer was killing my back . Not so sure the Allan scythe won’t be worse , it’s a beast 👍 , 2 Triumph66 and Stormin reacted to this Share this post Link to post Share on other sites
Triumph66 1,256 #5 Posted November 21, 2020 Glad to see that the Allen scythe is in action. If you are thinking of replacing the engine, let me know please! Share this post Link to post Share on other sites
Stormin 4,458 #6 Posted November 21, 2020 Speaking of Allen Scythes, a friend of mine has a none runner tucked away. Keeps saying he'll bring it over. I'll have to remind him. 1 Triumph66 reacted to this Share this post Link to post Share on other sites
