Joe the small engine man

hi all, as you know I got a FE35 Ferguson, but at the sametime I couldn't resist the Westwood! it was used as a bowling green first cut mower, it cam with spare belts and all the attachments. its a great runner with a new re-built gearbox, I also took the original gearbox as a spare for parts. the engine isn't the original, it looks like a 16HP Briggs but im not sure haven't had time to really look at it, so will have a better look soon! This is it loaded up on the trailer, as soon as I got it up there it ran out of petrol!

really nice bolens

Ive been putting multiple different things down the bores, ive cleaned the liners in two of the four bores, they were covered in rust , the next idea which I will do tomorrow is heating up the oil in a pan and pouring it in, thanks to wristpins comment , I had never thought of it! Regards Joe I need all the ideas, I can think of! that would be quit a collection!

ill certainly try it! just soaked them with coke, apparently it works! anyway i'm making a contraption to put over the cylinders to push the two down forcing the other two come up slowly, hopefully doing it every carefully it will free the rings on the cylinder from the liners, Ive done it before on a 3 cylinder perkins engine that was seized and it worked, so hopefully it will again! Regards Joe does anyone else on the forum own a FE35 or a TO35?

that looks like a tidy machine, good luck with the starter testing. Regards Joe

haha, the TO35 is the same as the FE35 accept it was produced in the USA, it started production a year after the UK started producing the FE35 in 1956, I think! Regards Joe I clean the liners in 2 of the barrels today, they were covered In surface rust. lots of work to be done in the next few mouths to get it going! the engine at the moment is sieved, but will hopefully be freed up soon

Welcome to the forum, great machines those gazelle's

That's fine Stormin, There are a few around the UK and other areas of the world. Thanks , I put some burning oil down them instead of diesel because it works better as a lubricant as well, will try and turn it over slowly tomorrow with a spanner, if no movement then ill leave it for a couple more days to soak. I gave it a wash today and it has a lot of the original paint on it and in fairly good condition! Regards Joe

I PM danarmdave but I haven't had a reply yet, thanks for the links will try and order parts. do you have any danarms In your collection?

The FE-35 (Gold belly) are rare as may people don't have them as many didn't sell, In the time of the tractor being made people didn't like the colour scheme that harry Ferguson wanted gold and grey its said even his employees told him that people wouldn't and didn't like the colours, and preferred the TVO 3 cylinder petrol (Perkins engine that was in the old standard cars), so many people either bought the Massey 35, which was painted the Massey colours grey and red, or even the older types for example TED-20 or TE-20 that was produced before the FE-35 and other older models which were just painted grey. As that tractor is its worth a bit not running, but when it is it can be worth over £3000, they go down in value if you re-spray them as collectors such as myself like the original patina, but if its too far gone that its full of rust they you would buy new panels and re-spray. Don't get the Ferguson FE-35 mixed up with the Massey MF35 different years (1955-1964) and colours (Red and Grey) and they have a different values in money. Regards Joe this is another picture will put some more up later after I have put some more WD-40 in the barrel and have washed all the moss and dirt of it

Your correct will get the correct ones up tomorrow! But anyway I got this as well as a pump! Haha sorry

the danarm has been put on hold because of all m new projects so will get back to this as soon as I can!

it comes with all the accessories, grass collector and sweeper, which I will pick up at a later date. it has a new gearbox and a different engine in her.

I picked up this villers water pump as it looked good and id never seen on before, it was too good of a deal! anyone know how much its worth? and any idea what year it would possibly be? it doesn't run but does turn and could run with some parts.

I picked up this villers engine the same time as the FE35 my other tractor thread. I thought It looked really nice and useful. good original paint and parts. does anyone know anything about the engine or what it was intended for?

Just got tarp off and now trying to inflate tyres! amazing how they all went up and have stayed up. this is the tractor out of the garden, without the bonnet as I was looking at the cylinders. this is it loaded on the trailer, with another tractor! which I also picked up from there a westwood t1200. this is the side of the engine as it was when we took the tarp off, it has a bit of old crumbling carpet over the barrels. this is it on the trailer again, from the back showing the westwood and the bonnet.

hi all, I have just got a gold 'n' grey fe35 Ferguson, it has a 4 cylinder diesel engine, It is completely original and hasn't been touch of over 20 years. it was left outside under a tarp for 12years, with the head off and the barrels open to the elements! the paint is fairly good. we went to move the tractor in the morning on Tuesday preparing are self's for a long day of moving it! but we inflated the tyres and to are amazement all the tyres inflated and have stayed up since, this was very shocking as they are all perished and have sat for over 12years in all weathers. we then put chains around the back axels and used a van to pull it out, it came out so easy I was so surprised. we then loaded it onto a trailer with a hand winch and it is currently on my yard awaiting its own shed to be build after new year! I'm now very busy spraying everything with WD-40 and have put ceresin down the bores to free it up a bit, and now I'm cleaning the surface rust off the inside of the liners. I will have to investigate the gear box as it wont go into gear, I have freed up the H and Low lever which in-gages and disinigages, I think the little ball that drops in to hold it in gear when driving is stuck and need moving. I think its going to be easy to get running as they are good engines, I have all the parts which just need bolting on, I will see if the engine will turn over tomorrow after the wd-40 and ceresin has done its job! then if it does I will bolt everything together and get a new battery, filters and fuel as I say everything is completely original, with even the original tax disc holder, with original tax discs in!

the patina looks good! will do, should be a good project

£800 is a lot but it looks worth every penny! is Ewan restoring it top to bottom (respray, new parts?)

if you dint mind me asking how much was the cub?

that commando looks like its just came out the factory!

anyone know where to get parts for a danarm? struggling for parts such as carb kit

how do you know if it needs new bearings? my hydro gearbox on my c-160 almost feels like its lost power over the last 3 mouth, do you have any ideas?

looks like a great machine! what will you do with the rolling chassis?