The Fife Plooman 632 #1 Posted January 3, 2015 Hi All Here is my first project of the year I hope you like The plough is of a BMB plowmate walk behind from front to back it is one foot longer and mouldboard has a different set on it Time will tell George S 3 Triumph66, Ian and OldBuzzard reacted to this Share this post Link to post Share on other sites
Triumph66 1,256 #2 Posted January 3, 2015 Is that on the back of your Gutbrod tractor? Share this post Link to post Share on other sites
Stormin 4,458 #3 Posted January 3, 2015 OOH! That's a big one. Share this post Link to post Share on other sites
meadowfield 1,900 #4 Posted January 3, 2015 Wow that's a beast, and I thought my plough was big! Share this post Link to post Share on other sites
The Fife Plooman 632 #5 Posted January 3, 2015 Hi The plough is on the back of my 1032 the hydraulic system workes of the engine so lifting will be no problem only time will tell 1 Triumph66 reacted to this Share this post Link to post Share on other sites
Ian 2,417 #6 Posted January 4, 2015 That's a good project to start the year with George, it should keep you busy for a little while Share this post Link to post Share on other sites
The Fife Plooman 632 #7 Posted January 15, 2015 Hi All This is plan B it is taking shape I have done away with tool frame at this time I have fixed it the same way as original plough except there is more scope for a disc ,manure skimmer or a scotch skimmer in the next move I may try a disc and a skimmer combined. The tractor lifts the set up with no effort which is good something I could not to with lift hand and wire rope I will keep you updated as I go along I cut 6 inches of the beam Hope you like 4 nigel, Triumph66, OldBuzzard and 1 other reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #8 Posted January 15, 2015 That looks a much tidier job. Share this post Link to post Share on other sites
The Fife Plooman 632 #9 Posted January 23, 2015 Hi All Wee bit more done to plough skimmer fixed, ploughshare in place but needs some work seems to be coming along well, next will be lifting chains,will be altering disc wheel to complete the plough hope you like 2 nigel and Stormin reacted to this Share this post Link to post Share on other sites
The Fife Plooman 632 #10 Posted January 31, 2015 Hi all update on my project, skimmer fixed, plough share altered to fit, oiled with owtrol oil looking good but the proof of the pudding will be in the eating will know on 15 Th February hope you like Share this post Link to post Share on other sites
Stormin 4,458 #11 Posted January 31, 2015 Nice job. Share this post Link to post Share on other sites
