S1g 579 #1 Posted January 9, 2016 After struggling to weld thin stuff with the arc welder scince my Mig packed up, my boss said he'd buy me a new one if I was willing to do the odd welding job for him aswell. Here it is, got to say that it welds absolutely amazingly, even someone who is as bad at welding as I am can get a nice run down, its nearly as good as the 3phz ones I used at college a few years ago. 2 Stormin and nigel reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted January 9, 2016 I wish my boss would buy me something like that. No chance she will though. 1 S1g reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #3 Posted January 9, 2016 Is it an inverter mig? Looks like my sip one. 1 S1g reacted to this Share this post Link to post Share on other sites
S1g 579 #4 Posted January 9, 2016 Is it an inverter mig? Looks like my sip one. Yes it's an invertor mig. Share this post Link to post Share on other sites
meadowfield 1,900 #5 Posted January 9, 2016 If it's like mine, then it'll weigh hardly anything - and weld thick and thin at the turn of a dial! Share this post Link to post Share on other sites
S1g 579 #6 Posted January 9, 2016 That's exactly like this one, it's main use is going to be on metal like car bodies but sometimes it will be handy for bollocking the heat into hammer nose cones to pull the tool bushes in so the will come out. We had a look round and this one seemed to be the best price at the top end of domestic ones, it will probably only get used a couple of times a month so should be ideal. Certainly will be better than my old sealey one that was less power yet 3 times the size and weight. Share this post Link to post Share on other sites
Wristpin 400 #7 Posted January 9, 2016 R Tech have a really good reputation for customer service too. 1 S1g reacted to this Share this post Link to post Share on other sites
meadowfield 1,900 #8 Posted January 9, 2016 I use mine quite a bit on full tilt just to get heat into something. Great for reducing labour, just grind of the weld after 1 S1g reacted to this Share this post Link to post Share on other sites
Wristpin 400 #9 Posted January 10, 2016 I use mine quite a bit on full tilt just to get heat into something. Great for reducing labour, just grind of the weld after Different take on "Weld a little, grind a lot" Share this post Link to post Share on other sites
S1g 579 #10 Posted January 11, 2016 I used it this morning for the first time properly,putting some patches on my bosses caddy pickup's shock absorbor towers, not the prettiest but considering there was almost no metal left to weld to it did ok. Got a feeling it may be the pickup's last mot, but then again it is allmost 20 years old and the clock stopped at 212k about 8 years ago so has probably done well over 300k. Share this post Link to post Share on other sites
howardman 30 #11 Posted January 13, 2016 Looks a good bit of kit . I am spoilt i have a friend who is a professional welder and he is great at fabricating as well . Its got me out of a trouble a good few times. 1 S1g reacted to this Share this post Link to post Share on other sites
S1g 579 #12 Posted January 14, 2016 Looks a good bit of kit . I am spoilt i have a friend who is a professional welder and he is great at fabricating as well . Its got me out of a trouble a good few times. I am really please with it, perhaps not the tool if you're welding all day every day ( the reels of wire that it takes are too small for starters) but more than sufficient for the use that I'll give it. Share this post Link to post Share on other sites