dubscum 38 #1 Posted January 31, 2016 bought is about a year ago it had been stood for over 3 years after its working farm life. I thought it was far too cool to leave to rot. So after some haggling we agreed a price (farmer did not want to sell) Basically everything needs doing and its very much a work in progress. the cab is rotten as a judge but its looking a lot better now 1 Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #2 Posted January 31, 2016 Hi Ash, your 590 certainly has come a long way since you bought her.. Fantastic work Now.. Where's that photo of you out buying beer? Share this post Link to post Share on other sites
dubscum 38 #3 Posted January 31, 2016 hahaha. Yes my Mrs was out in my van and i'd got no beer ...... so this happened 5 Ian, Cub Cadet, Triumph66 and 2 others reacted to this Share this post Link to post Share on other sites
Ian 2,417 #4 Posted January 31, 2016 A classic photo Have you taken it through a drive-through yet? 1 Triumph66 reacted to this Share this post Link to post Share on other sites
dubscum 38 #5 Posted January 31, 2016 not yet, need to check the hight barrier. When i do there will be photos Share this post Link to post Share on other sites
meadowfield 1,900 #6 Posted February 3, 2016 nice wheels - can't beat a tractor in the supermarket car park Share this post Link to post Share on other sites
DevonianRedneck 86 #7 Posted February 3, 2016 cant beat a 590, hell of a tool, though the 4wds had the turning circle of the titanic, even got the P.A.V.T on yours, is yours a 3 stick gearbox, or a 2 stick? 1 dubscum reacted to this Share this post Link to post Share on other sites
dubscum 38 #8 Posted February 5, 2016 its 2 stick but has the multi power switch on the dash for quick change hi / low ratio Share this post Link to post Share on other sites
DevonianRedneck 86 #9 Posted February 6, 2016 love multipower, my grandad used to have a 35x mp, you could overtake cars on a downhill run if you flicked it into low! (don't try this its obviously immature and very dangerous! ) we used to use it for augering post holes because you can just dip the clutch when doing up hill runs and the gearbox will still hold the tractor in place while the augers digging, then simply lift up and drive on to the next spot all without using the foot or hand brakes. Share this post Link to post Share on other sites
Ian 2,417 #10 Posted February 10, 2016 I've just found this photo in my PotatoBucket account, I think it's a 500 series (hard to see the decals), dirty and rusty but still putting in a full days work loading round bales in the fields behind where I used to live 6 or 7 years ago. 1 DevonianRedneck reacted to this Share this post Link to post Share on other sites
DevonianRedneck 86 #11 Posted February 10, 2016 Defiantly a 500 series, a Coventry built one, earlier model, most likely a 590, but the 575 was similar in wheelbase, and what looks like a a JD 2850 or 2650 with mfwd drove one of those for a couple years at my old job, mainly on a hedge trimmer 1 Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #12 Posted February 12, 2016 Defiantly a 500 series, a Coventry built one, earlier model, most likely a 590, but the 575 was similar in wheelbase, and what looks like a a JD 2850 or 2650 with mfwd drove one of those for a couple years at my old job, mainly on a hedge trimmer Your right they are JD's, one looks like a 7000 something, I can't make out the closest one.. They both made my Wheel Horse look very small Share this post Link to post Share on other sites
meadowfield 1,900 #13 Posted February 12, 2016 I'd go with it be being a 2850... Raised air intake and front axle gives some age to it. Guessing there's a few years between pics Ian? Share this post Link to post Share on other sites
DevonianRedneck 86 #14 Posted February 12, 2016 I'd go with it be being a 2850... Raised air intake and front axle gives some age to it. Guessing there's a few years between pics Ian? Can see the back of an SG 2 cab as well, other two look like a 7830, and 6630 premium (drove one of these as well on the same farm), Share this post Link to post Share on other sites
Tom 215 #15 Posted February 12, 2016 Big one is a 7930 and I'm pretty sure the small one is a 6420s, I do love the deeres Tom 1 DevonianRedneck reacted to this Share this post Link to post Share on other sites
DevonianRedneck 86 #16 Posted February 12, 2016 massey man myself, as long as its a pre 2000 one, last good tractor they made was the 300 series/3000, not thats theres ought wrong with a deere,, but they do paint em green so they blend in with the hedgerows, when the've broke down to save you the embarassment! clever marketing stategy there! (though ! cant really say much as my work rig (MF7480) is currently out of action with a blown front diff and some seemingly un-diagnosible electric le problem! I miss my 3075! ) Share this post Link to post Share on other sites
Ian 2,417 #17 Posted February 13, 2016 I'd go with it be being a 2850... Raised air intake and front axle gives some age to it. Guessing there's a few years between pics Ian? The pics were taken 5+ years ago, but they were taken minutes apart Share this post Link to post Share on other sites