HeadExam 1,783 #1 Posted March 21, 2016 I bought an old trailer at auction a few months back and I am getting around to fixing it up a bit. Two coats of Industrial enamel with hardener and reducer made the metal look fairly good, after three hours sanding and prepping. I used some left over oil base rusty metal primer, oil stain, and varnish to make a paint stew for the old wood, Then I made some tali light brackets from some left over metal bits. Later this week I will install the wiring, attach the lights, and finally install the jack mount and tongue jack. Before and after pictures below. 3 Triumph66, pmackellow and Ian reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted March 21, 2016 That's a handy sized tipping trailer. 1 HeadExam reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #3 Posted March 21, 2016 Looking good ! 1 HeadExam reacted to this Share this post Link to post Share on other sites
HeadExam 1,783 #4 Posted March 22, 2016 Added lights and a jack 5 Ian, Alan, Triumph66 and 2 others reacted to this Share this post Link to post Share on other sites
Ian 2,417 #5 Posted March 27, 2016 The trailer looks so much better after a coat of paint 1 HeadExam reacted to this Share this post Link to post Share on other sites
HeadExam 1,783 #6 Posted March 27, 2016 The trailer looks so much better after a coat of paint Coat(s) lol Share this post Link to post Share on other sites
Triumph66 1,256 #7 Posted April 2, 2016 You have done a good job there Alain. That should last another 20 years. Share this post Link to post Share on other sites
