Darmic1 447 #1 Posted August 31, 2016 I have finally got around to restoring the 2 machines that came from Wallfish in a deal we did some time ago....... Both these machines, along with my O&R engine and Paul Mackellow's collection will be displayed at the Autumn Tractor World show in October. Here's a reminder of the 'before' condition, not that bad really, but my OCD dictated that I should restore them with a new coat of paint and some of Titch's fine artwork! 2 S1g and pmackellow reacted to this Share this post Link to post Share on other sites
Darmic1 447 #2 Posted August 31, 2016 Both machines were stripped down, had the old paint removed, a coat of etch primer and the several light coats of colour matched paint applied....... The fuel tank on the hedgetrimmer needed a bit of work! 2 S1g and pmackellow reacted to this Share this post Link to post Share on other sites
Darmic1 447 #3 Posted August 31, 2016 Once the paint had hardened I reassembled the machines and sent Titch the details for the decals to be reproduced....... I then hand painted the raised ORLine logo. Here is the Chainsaw and Hedge trimmer all back together with the new paintwork! 2 pmackellow and S1g reacted to this Share this post Link to post Share on other sites
Darmic1 447 #4 Posted August 31, 2016 I used a couple of pictures found online to send along with the carefully removed old decals for reproduction. Titch @ Machinery Decals has done it again! perfectly recreated decals to adorn both these machines....... Here they are wearing their new clothes! The Mustang's bar decal has proved a little more difficult, however it is being worked on! 5 1 pmackellow, HeadExam, CNew and 3 others reacted to this Share this post Link to post Share on other sites
HeadExam 1,783 #5 Posted September 1, 2016 They look better than new! Beautiful work Share this post Link to post Share on other sites
Wallfish 698 #7 Posted September 1, 2016 Looks great! Share this post Link to post Share on other sites
factory 487 #9 Posted September 12, 2016 On 8/31/2016 at 9:27 PM, Darmic1 said: I used a couple of pictures found online to send along with the carefully removed old decals for reproduction. Titch @ Machinery Decals has done it again! perfectly recreated decals to adorn both these machines....... Here they are wearing their new clothes! The Mustang's bar decal has proved a little more difficult, however it is being worked on! Very nice restorations, I have a few in need of a repaint, also its good to know you can get the other decals too. David Share this post Link to post Share on other sites
