Cub Cadet 613 #1 Posted February 27, 2020 Quick little fabrication project. I repurposed this 3 wheeled walker thing that my grandad got his brother as a joke present . I didn't use any of the original tubing as it was quicker to use square stuff we already had. The bottle sits low down over the back wheels for stability. The old adjustment knobs were used to attach the chain, works well. For the novelty factor I used the handles makes it easy to push around. All finished, its proved very useful so fair when moving it between workshops! I might add some bars on the sides later to hold the welder and plasma cutter on properly. Works well enough without them though 5 1 Stormin, pmackellow, Triumph66 and 3 others reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted February 27, 2020 Good idea, Ewan. Neat job as well. 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
pmackellow 2,738 #3 Posted February 28, 2020 Top Job Ewan 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
mattblack 76 #4 Posted February 28, 2020 Nice job. We get a few scrap walkers at work, I've just saved the wheels off one for a 2-wheel trolley I'm going to make for my current little project. 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
