paul 64 #1 Posted June 21, 2014 Farmers gone mad in Hampshire trying to get hay done. I have been asked by the local farmer to cut a wild flower meadow down later on in the year so today I got the allen out and cut down the hay where the mower cannot get to ie. round the troughs and fence line and was amazed it started first go. Paul 2 Lauber1 and Anglo Traction reacted to this Share this post Link to post Share on other sites
Chris 642 #2 Posted June 21, 2014 Nice paint job! Got alot of spares for allen scythes which I am going to sell if you need anything Share this post Link to post Share on other sites
paul 64 #3 Posted June 21, 2014 YES I may be intrested . This one only had half a engine when I got it and a no blade whatsoever so I got a new engine from a man in petworth down your way so always on the look out for spares. This one is a ts with a mk 15 fourstroke Villiers. paul Share this post Link to post Share on other sites
Chris 642 #4 Posted June 22, 2014 Man in Petworth. Would that be Mr Eames What kind of spares do you need??? PM me a list etc Thanks Share this post Link to post Share on other sites
paul 64 #5 Posted June 22, 2014 Yes that would be mr eames. Very good bloke. Paul at meetens put me on to him. He supplied me with a replacement mk15 engine. So i am looking for spares for it also spare fingers for the blade Share this post Link to post Share on other sites
Chris 642 #6 Posted June 22, 2014 (edited) Chris is not far from me. Surprised he sold you an engine. He likes to hang on to everything! Plenty of carb bits here & even a good piston, rings & con rod. Manifolds etc Some mag bits. All good 2nd hand Plenty of blade bits which I am going through Even got some new clutch control handles. How often do you need one of those!! Edited June 22, 2014 by Chris Share this post Link to post Share on other sites
Stormin 4,458 #7 Posted June 22, 2014 Mate of mines got an Allen Scythe. None runner and had it for years. I keep trying to get him to do it up. Or give it me. Share this post Link to post Share on other sites
the showman 4,074 #8 Posted June 22, 2014 Need to watch ya toes with one ov em Share this post Link to post Share on other sites
steve d 43 #9 Posted June 22, 2014 That's a very nice machine Paul. Share this post Link to post Share on other sites
Anglo Traction 1,016 #10 Posted June 23, 2014 That's a very nice machine Paul. Ditto. Very impressive job and I really like the look of those Scythes. Maybe I'll find one to do one day. Share this post Link to post Share on other sites
paul 64 #11 Posted June 23, 2014 When I got the scythe it had a s12 carb on it but the float had a pin hole in it and the horseshoe shaped pin that operates it was broke . do you have any of these Chris? Share this post Link to post Share on other sites
Chris 642 #12 Posted June 24, 2014 Sorry Paul. I have just sold the remains of the S12 carbs I had Plenty of bits for the carb you have fitted now Share this post Link to post Share on other sites
Anglo Traction 1,016 #13 Posted June 24, 2014 Hold on to the S12 as well for now Paul. I will be stripping the one out I have to rebuild it, so I'll see if I can make the part you mention. Float could be repaired too if just a pin hole or available still?. Also - Chris thanks for noticing both our S12 needs, despite us missing the boat on the Parts. Share this post Link to post Share on other sites
paul 64 #14 Posted September 1, 2014 Allen been out for a day in sunny Hampshire yesterday to cut a orchard come wild flower meadow. Took about 2 hours and about that for my shoulders to come round after. Paul 3 Lauber1, Anglo Traction and Ian reacted to this Share this post Link to post Share on other sites
Ian 2,417 #15 Posted September 2, 2014 No wonder your shoulders hurt Paul, that's a lot of long grass to cut... But a job well done Share this post Link to post Share on other sites
