Morning all, only a small update I'm afraid, life is still keeping me very busy and I don't see it getting quieter anytime soon!
Not much to show really, but I have been working on mounting the rear brake pedal and cylinder.
Quite a hard thing to photo if you don't have a clear different colour background!
I have fitted the Quadzilla brake pedal, it was originally a flat plate that was bolted to all sorts of places to give it strength.
As I couldn't do that I had to box it in. Here's the other side.
Brake cylinder bolted on.
The whole footrest/brake pedal mount thingy bolted back on.
The rubber hose to the reservoir will sit just under the steel mesh when it's put back on.
The pedal looks like it's lying almost flat, but it's in the right place if you pivot your foot on the end of the footrest which is where your feet naturally fall
I will make a shield that uses the cylinder bolts to add so side protection to the cylinder..
Starting to look a bit busy with the exhaust and driveshaft plonked in place, the propshaft guard will take up a bit more space as well.
And that's as far as I have got photo wise.. I have been making a bearing mount removable and made two of the four mounts needed to go on the bearing that holds the shaft that comes out the bike gearbox..
I will get some photo's tomorrow that might explain it a bit better than I did above