Leaderboard

Decided to give the fleet a service yesterday. Engine oil on all except the C-125. That was done after the rebuild. So C-81, The Black Horse and Sears/Roper all got new blood. The trans were drained by jacking up the front and a 3" block under the RH rear wheel. I only did the C-81 and C-125. The oil in the other two was done last year and still clean. I did find both RH rear tyres on the C-81 and C-125 had no air in. C-81 possibly not sealing and the C-125 has a split valve. They'll be sorted next week. Today was grease day. Every grease nipple I could find got done. Much to my surprise the Sears/Roper had no grease nipples in the axle spindles. Holes yes. Nipples no. Also no way to grease the axle pivot. OK! I'll do something about that. Jack up the front and lower on to axle stands. Keep the H&S bods happy. Removed the track rods from the spindles and spindles complete with wheels. Why make work. Then the axle itself after removing the front hitch. With that on you couldn't remove the pivot bolt. Drilled out the holes for the nipples and re-threaded to take the larger nipples I had. The nipples protruded into the spindle tube, so thin washers were used to pack them out. Next the pivot bolt. This was over long so lost a1/4" then into the lathe to have a grease hole drilled up the centre. Then a hole drilled through the bolt shank halfway along. Finally the end threaded to take a grease nipple. All back together and greased.

Well, I'm at the A&E 😢. Today was not a good day. I decided to go horseback riding - something I haven't done in many years. It turned out to be a big mistake! I got on the horse and started out slowly, but then we went a little faster; before I knew it, we were going as fast as the horse could go. I couldn't take the pace and tried to gracefully bail. Unfortunately, my foot got caught in the stirrup and I got dragged by the horse through the feedlot. I couldn't get the horse to stop and was choking on cow chips (yuck!). Thank goodness the manager at Toys-R-Us came out and unplugged the machine. But, he had the nerve to take the rest of my change so I wouldn't attempt to ride the elephant.  Copied from RS.