Jump to content

tvenetis

Members
 View Profile  See their activity

  • Content Count

    164

  • Joined

  • Last visited

Everything posted by tvenetis
 
 
  1. tvenetis
    On the carburetor how do you loosen the top inside screw that holds it on to the engine. There is no room to get a screw driver straight on the screw. Thank you.
  2. tvenetis

    Hi Bob  What is the procedure in tieing the rope on the spool with a piece of wire thanks.

  3. tvenetis
    I am also looking for a starter paw that goes on a pin on the flywheel thanks.
  4. tvenetis
    Since I can't see pictures is there text on how to wire the rope on the spool?
  5. tvenetis
    I wonder if I can make the flapper.
  6. tvenetis
    Bob I am referring to the piece that goes on top of the thick gasket that is held on by a screw and the need valve nut.
  7. tvenetis
    On my tiny tiger it runs okay but the flapper gasket is missing. What is the purpose of that flapper thanks.
  8. tvenetis
    A friend came over and helped me put it together. So the pin just sits in the grove after you put the arm in?
  9. tvenetis
    I accidentally dropped the diaphragm body on my conter and the lever fell out. What holds the lever in. thanks
  10. tvenetis
    When you replace the diaphragm does the gasket go on top of the diaphragm then the cover with the button goes on? thanks.
  11. tvenetis
    Hi does any one know where I can get a gas tank for the Ohlsson .60 thanks.
  12. tvenetis
    I am looking for carburetor and governor for ohlsson and rice drill and also the fitting that the needle valve screws in to for a ohlsson water pump thanks.
  13. tvenetis
    I finally got it wound. I took small vice grips and I held the spring near where it fits on to the spool. Then I held the vice grips in a vice and wound the spring then I took another small vice grips and squezed the spring so it would not unwind. I took the middle vice grips off and dropped the spring in the housing.
  14. tvenetis
    Thanks I tried that but it is hard to hold the center from uncoiling.
  15. tvenetis
    I am repairing a recoil for a ohlsson drill and was wondering how to wind the spring. I made a 2 inch pipe to fit the spring in after it is wound thanks.
 
×
×
  • Create New...