Jump to content

Lauren1985

Members
 View Profile  See their activity

  • Content Count

    20

  • Joined

  • Last visited

  • Days Won

    1
Everything posted by Lauren1985
 
 
  1. Lauren1985
    what paint code is that please :-) now you have inspired me hehehe :-)
  2. Lauren1985
    It's a hayter 21. It's the smaller version of the hayter osprey as pictured and described in this post
  3. Lauren1985
    Hello Everyone I need the Belt Pulley bearings. they are ball bearings. The Original part was 2384. obviously long since obsolete BUT Does anyone know the size of the bearings needed. I dont really want to dismantle it until i have the new parts. Thankyou in advance Lauren
  4. Lauren1985
    I will be intrigued on how long the cutter deck belt lasts. I have an 11.5 21a807 0168 e1 ohv intek I want to try on it lol. I don't have all the clutch parts. I push it manually 🥵🥵🥵
  5. Lauren1985
    I need the bearings for the cutter deck. I have tried greasing them and they get hot :-( Its HA2384 or HY2384 ?
  6. Lauren1985
    Not to be pedantic but the 5HP engine is a 13 cubic unit (12.6) to be precise ie 206cc engine.
  7. Lauren1985
    It shouldn't give much of a fight. What condition is the actual needle in.
  8. Lauren1985
    I find those difficult to adjust because there's no fully turned in point. I find that turning it all the way in while it's outside of the carburettor helps. Let me know how you get on
  9. Lauren1985
    Is this the push in plastic type.
  10. Lauren1985
    what is the cutter belt size on the 21 please Lauren
  11. Lauren1985
    A friend that has a lawnmower repair/sales business found one in the cobwebbed area of the parts store lol. There are a few new ones online but why not buy hew linings and epoxy the pad to the disc. https://www.autoandindustrial.co.uk/clutch-facings-in-various-materials/
  12. Lauren1985
    Best budget tyres for a 21 ?
  13. Lauren1985
  14. Lauren1985
    Thankyou so much Richard !!! :-)
  15. Lauren1985
    What age is the engine in question. Briggs and stratton use a Model Type Code layout If the Code is 890202 for example that means it was made in 02/02/1989 Lauren
  16. Lauren1985
    How much to paint my 1989 21 LOL
  17. Lauren1985
    if no kill wire it should run but you wont be able to stop unless you unplug the wire from the plug. i suspect the coil there is a test in ohms you can do. i cant remember the measurement.hopefully someone else will help
  18. Lauren1985
    Perhaps we need a sub page :-) for Old Hayter machinery :-)
  19. Lauren1985
    Old Thread But Highly Relevent. !!! Just acquired a Hayter 21 Serial 016 5 Hp Briggs 132922 1989 engine needed a new clutch (reason it was dumped in the hedge) It runs great Lauren
  20. Lauren1985
    which packaging should i look out for, for the original araldite ? I dont want that 5 minute one. Lauren p.s ive seen this one
 
×
×
  • Create New...