GAV694 23 #1 Posted March 26, 2016 Has anyone got any pictures or information on how to attach the potato or veg planters to a Gutbrod? I have just bought a potato planter but I am not sure how to connect it up. The planter isnt home yet but should be in about a weeks time. I know you use the standard tool frame like this (without the grubber) And there are brackets which I dont have The center bracket looks like it will couple the planter to the tool frame but I am not sure what the other two are. I was thinking lift arm extensions but I think the planter will be heavy hanging that far behind the tractor. Any thoughts? 3 HeadExam, 4x4forks and Stormin reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted March 26, 2016 I can't help but that looks a great little machine. 1 GAV694 reacted to this Share this post Link to post Share on other sites
The Fife Plooman 632 #3 Posted March 27, 2016 Hi John This will look well at the rally the theme being potatoes A Ferguson Elf with planter,a Gutbrod 1032 with Rotavator,a Gutbrod 1032 with drill ploughs and an Anzani iron horse with a potato lifter and a ransome MG with a plough 3 HeadExam, Stormin and GAV694 reacted to this Share this post Link to post Share on other sites
GAV694 23 #4 Posted March 27, 2016 Hi John This will look well at the rally the theme being potatoes A Ferguson Elf with planter,a Gutbrod 1032 with Rotavator,a Gutbrod 1032 with drill ploughs and an Anzani iron horse with a potato lifter and a ransome MG with a plough Yes if all goes to plan we will see you there George. I am sure I can fab up some brackets to make it fit even if they are not quite to the original design. Is it a working day or just for display purposes? Share this post Link to post Share on other sites
4x4forks 258 #5 Posted March 29, 2016 Hi John Looks like it may need a power input on the right hand side of the hopper. Maybe a land driven wheel. Commercial ( full sized) machines are land wheel driven. Great looking bit of kit. Share this post Link to post Share on other sites
GAV694 23 #6 Posted March 29, 2016 Hi John Looks like it may need a power input on the right hand side of the hopper. Maybe a land driven wheel. Commercial ( full sized) machines are land wheel driven. Great looking bit of kit. Yes there is a wheel to drive it but its had a few parts removed to get it ready for shipping. Once I get it home I will post some pictures of the complete planter. Share this post Link to post Share on other sites
GAV694 23 #7 Posted April 11, 2016 So at long last the planters were delivered today, only had enough time to take them off the pallet and get a quick photo to show the drive wheel that turns the bit that drops the potatoes. 4 nigel, Stormin, Triumph66 and 1 other reacted to this Share this post Link to post Share on other sites
4x4forks 258 #9 Posted April 12, 2016 That looks like it will be a lot of fun . Glade to see it has finaly arrived Share this post Link to post Share on other sites
