4x4forks 258 #1 Posted February 12, 2017 Morning All. Just picked up the plough yesterday an I was wondering if anyone could recognise it as a known made. Some one has welded up the disc swivel but not to much wear on the disc bearing . the moldboard adjuster has freed off ok and it just need a clean and paint. 4 the showman, Old Tankman, Cub Cadet and 1 other reacted to this Share this post Link to post Share on other sites
C-101plowerpower 548 #2 Posted February 12, 2017 id say brinley/ wheelhorse since it looks to have a slot hitch thingy on it 1 Adams94 reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #3 Posted February 12, 2017 Has a look of a Brinley. Google Brinley ploughs and compare. Share this post Link to post Share on other sites
Cub Cadet 613 #4 Posted February 12, 2017 I think its definitely an early Wheel Horse plough although some Brinly ploughs are very similar, nice find! 1 Adams94 reacted to this Share this post Link to post Share on other sites
C-101plowerpower 548 #5 Posted February 12, 2017 might also be an ohio steel one if its an early wh one 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
4x4forks 258 #6 Posted February 12, 2017 I have found that the Disc mount position is not standard. Once I unbolted it the holes have been gas cut out but you can see the standard position forward of it. 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
squonk 71 #7 Posted February 12, 2017 (edited) I have a similar plow without the wheel. It was made by Brinly for Wheel Horse. Edited February 12, 2017 by squonk 3 Cub Cadet, 4x4forks and pmackellow reacted to this Share this post Link to post Share on other sites
4x4forks 258 #8 Posted February 13, 2017 That looks Great and exactly like mine. Dose anyone have a idea as to what it is worth? 1 Cub Cadet reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #9 Posted February 13, 2017 Google Brinley ploughs. You can buy them new in the States last year. About £250 our money. One here on flea-bay went for really daft money. You could have imported one for less. 1 4x4forks reacted to this Share this post Link to post Share on other sites
4x4forks 258 #10 Posted February 18, 2017 Just trying to make it fit the Gutbrod1032 by reproducing the Wheelhorse mounting. Share this post Link to post Share on other sites
4x4forks 258 #11 Posted February 18, 2017 Yah! It works. Not set yet, I will have to find some virgin ground to work on. Also fitted my Xmas present of a tool box behind the seat. 6 Stormin, Old Tankman, C-101plowerpower and 3 others reacted to this Share this post Link to post Share on other sites
