Stormin 4,458 #1 Posted April 21, 2017 Last year I made a couple of display stands. Simple T design, similar to ones made by The Showman. These just press into the ground and information board mounted across the top. At the HVC rally at Carlisle airport on the coming weekend, the entries are mainly on hard standing. Thinking drilling holes in the runway wouldn't go down well, I had a root around and found a pair of plastic wheels and some scrap ply board. Screwed each wheel to a piece of board, then a splash of paint and viola the result below. The stand spikes are a good push fit in the wheel centres. Still not very stable in breezy/windy conditions and the airfield is certainly breezy. I have in my store shed a large jar of lead shot, left over from when I reloaded shotgun cartridges. Tomorrow the wheels will be filled with shot. That should stop them blowing over. 7 DougC, ACman, Alan and 4 others reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #2 Posted April 22, 2017 As of this morning the wheels contain 3lbs of lead shot. Nice and stable now. 1 S1g reacted to this Share this post Link to post Share on other sites
expeatfarmer 591 #3 Posted April 24, 2017 I have booked in 137 Norm and will bring two others for display only. Share this post Link to post Share on other sites
