Stormin 4,458 #1 Posted May 11, 2019 Having been given some trees nearby that have been ripped out with a digger, I decided to make a tote for chainsaw etc. This will fit on the front of the Sears GT16 which I use for towing my Saxon trailer. Better than having to carry things back balanced on a load of wood First I made this out of scrap wood. The hitch pin has to be removed to fit it and when replaced stops the frame from sliding out. Next a made a box out of wood salvaged from a disused dog kennel. The box has yet to be finished, but has been tested for strength. Takes my 12-1/2 stone easily. 6 Alan, factory, Anglo Traction and 3 others reacted to this Share this post Link to post Share on other sites
HeadExam 1,783 #2 Posted May 12, 2019 Nice, it can double as a front weight box when using rear implements Share this post Link to post Share on other sites
Stormin 4,458 #3 Posted May 12, 2019 3 hours ago, HeadExam said: Nice, it can double as a front weight box when using rear implements I don't have any implements for the Sears, Alain. Only the frame that goes underneath for a mower deck. Share this post Link to post Share on other sites
Stormin 4,458 #4 Posted May 12, 2019 Trial fit. Chainsaw, fuel, chain oil, toolbox and hard hat. All done and dusted. For some reason I can't upload the final photo. But it's on Red Square if anyone wants to see it. 4 Cub Cadet, slf-uk, Alan and 1 other reacted to this Share this post Link to post Share on other sites
Stormin 4,458 #5 Posted May 13, 2019 Bingo! 6 slf-uk, Cub Cadet, nigel and 3 others reacted to this Share this post Link to post Share on other sites
