CNew

That’s for sure.  A couple tanks came up a few months back, including a vertical one and I hesitated and have been kicking myself ever since.

Just saw it too and the seller confirmed it is a second one.

Yep, you’re probably right about that- it’s probably just as risky to have them take things apart.  This one was packaged with bubble wrap but clearly the shipping carrier must have tossed it across the shop or threw it into the delivery truck slamming it against a wall or floor. The dents in the tank match the outer profile of the recoil housing so it must have slammed pretty hard somewhere along the way. It must have flexed the mounting bracket by almost 1/2” for it to make contact with the housing.  Irritating

On 11/7/2019 at 6:33 PM, JDB44 said:

Bench is a mess..... that's years of projects. Should see the area around the bench.

I can't find anything when I clean it up!

Will see what I can do to get Gen off. Looks like need to disassemble generator to get off of block. Will post picture when I do and cylinder.

Just now starting to get things unpacked and set up in the project room. Starting with a fresh work bench...  won’t stay pretty for long!

From now on I’m going to specifically request the sellers to remove the gas tanks, air cleaners and exhausts from these engines before shipping.  I thought about it after it was already shipped. 

Thanks JustO&R, I will PM you.

On 11/14/2019 at 1:05 PM, JUST O&R said:

Well it looked good just copied and pasted ad.  did anyone here get it??

Well, the engine arrived this afternoon. It’s incredibly disappointing to receive what looks to be a brand new engine only for it to get damaged during shipment. The new tank was crushed, man that’s irritating!

Stumbled across this Mono Safari model chainsaw that has an O&R 20A engine.

http://www.chainsawcollectors.se/phpbb3/viewtopic.php?f=70&t=5723

Hi JustO&R - sorry about that. I thought you were giving us all a heads up about the saw being for sale. Are the photos of the yellow saw one of your upcoming projects?  That one looks in nice condition. It’s cool that it also has the Mono tree sticker on the recoil housing. I can’t seem to find anyone that makes a reproduction decal in the smaller size, the only ones I’ve seen are 3.25” in diameter and would probably work for the chain cover.

I think it’s kind of odd too that they painted everything on some of these tools. I have a Pony Express bicycle engine that is also completely painted.

17 hours ago, factory said:

 

If you need to match slightly faded paint, then a car body shop should be able to mix some to match & put it in a rattle can for you.

 

David

Great idea David, I likely have some good auto body shops here in Arizona

Got in touch with Revmix last night about it so hopefully it all works out.

Thank you!  At first I thought it might be Wheelhorse red.

For th insulator cap would it be possible to wrap a little foil around it and then use heat shrink tubing to make a custom fit cap (then remove the foil of course)?

17 hours ago, JUST O&R said:

body filler.

By the way, what brand/color of red paint do you use- that’s a pretty nice match to original O&R?

David,

    Thanks for adding the link to the Unknown applications- these are great! It’s fun to see all the various tools and machines.

Clint

That Nobco Power Beam is too freak’n cool!

Yes, definitely cool to see how people put these little engines to use.

Ahhhh, that makes sense. At first I thought you pulled al the dents out somehow. That’s a really awesome job with the full and finish!

Wow, I’m impressed!  How did you end up getting the tank so nice looking?

I assumed it was home made as well

On 12/24/2014 at 8:27 AM, pmackellow said:

Here's my half a compressor set !!

 

 

What engine model and gear box are used on the Orline compressor?

This one may be a shelf unit too. I don’t have any immediate plans for it in an application but we’ll see. I need to start tackling my Aquabug

project!

Very nice- what is it attached to?

2 hours ago, JUST O&R said:

Its about time you got a project started. Doing the carb on the h as we seek Its about half done .

Nice!  Yeah, it’s hard to pass up those opportunities. 
 

Your H engine looks like it’s coming along nicely!

Got it😀.  I was hoping it might be a 3/4...

Saw that, made an offer but no response.

Very nice, those cutoff saws are a nice compliment to the chainsaws!