Jump to content

tvenetis

Members
 View Profile  See their activity

  • Content Count

    164

  • Joined

  • Last visited

Everything posted by tvenetis
 
 
  1. tvenetis
    Thanks I am blind can't see pictures so I gather when you say spcer you are talking the round pieces that have the hole in the middle then the last one is the piece that has small holes then you put the muffler?
  2. tvenetis
    do you have paypal? and we can talk here is my email tvenetis@optonline.net
  3. tvenetis
    I will put it in a padded package probably 5.00. What else do you need
  4. tvenetis
    25.00 plus shipping
  5. tvenetis
    I have the needle valve and diaphram and gasket if interested.
  6. tvenetis
    I think I have a diaphram and gasket if interested.
  7. tvenetis
    you need the needle valve and what else.
  8. tvenetis
    I have a needle valve spring and the nut that screws in to the carburetor.
  9. tvenetis
    So you put spacers with hole in middle then 1 muffler then the spacer with small holes in it?
  10. tvenetis
    Thanks and when you put the ohlsson mufflers you put the spacers that have smaller holes between each muffler? Some of the spacers I have have a hole in the middle also
  11. tvenetis
    I clicked on the manual and it said can't access it.
  12. tvenetis
    It took the small muffler and I am just running it not for camping. I am going to try and run a battery charger with it.
  13. tvenetis
    I had original muffler on it stil very loud so I will look for another.
  14. tvenetis
    I modified the muffler pipe on a tiger tiger and screwed a briggs stratton small muffler but it is still noisey. Is there a quieter muffler I can adapt thanks.
  15. tvenetis
    I am working on a chain saw and had to take the handle apart to fix the throttle cable. I can't figure where the spring on the throttle cable is supposed to hook to. I figure one end goes around the cable on the trigger and there is another end of the spring is bent at a right angle and has a long straight end but where does that go thanks.
  16. tvenetis
    On the gasket that goes over the read valve which is supposed to seal the cover can you use a o ring instead?
  17. tvenetis
    When you use a sharpening stone to make it thinner how do you hold the key.
  18. tvenetis
    I am replaceing a coil on a ohlsson engine but how do you feed the wire around the cylinder to put it on the stud thanks.
  19. tvenetis
    I had a friend help me pack the needle bearings on the connecting rod where it goes on the crankshaft and that was not easy. I wish there was a easier way to position them on the connecting rod.
  20. tvenetis
    For anyone interested I have a Ohlsson & Rich chain saw which I repaired and got running for 300.00 and I alson have a ohlsson hedge clipper which I got running for 300.00. I have a picture of the chain saw and will try to get pictures of the hedge clippers.
  21. tvenetis
    Thanks John on the carburetor arms that have the rubber on it if the rubber is bad can I put a ball in the hole like the older carbs?
  22. tvenetis
    I realize that but the small line might fit on the carburetor tighter.
  23. tvenetis
    I have some of that thing gas line that ohlsson sold how do I soften it up so I can use it thanks.
  24. tvenetis
    Yes I did it before but now the screen came off the connection inside the tank.
  25. tvenetis
    On the engines with the gas tank on the bottom how are you supposed to replace the filter in the tank.
 
×
×
  • Create New...