HeadExam

I'm not sure if average and American can be used in the same sentence, lol

I did the same thing. I bought a 10hp motor for my air compressor off ebay, when I arrived at the dock it was on a pallet, all 345lbs and at 22" long and 12" wide it wasn't going to set on my air tank very well, It looked smaller in the picture, I learned the same lesson after a few internet dates with "average" size ladies, not sure which was bigger.

I would venture to say a very small handful. I have only seen pictures of one or two. BTW, Simplicity and Bolens were not the only manufacturers to make tractors for Wards around this time, Moto-Mower also made a 10hp vertical shaft riding mower for them as well. The difference between a riding mower and garden tractor is usually defined by horizontal shaft and bolt on rear tires, versus vertical shaft and rear tires attached via key way or holder.

With hammertone or metallic paints, whether in the rattle can or used from a container, one must be very careful not to over apply as the finish looks different when it is puddled

Really rare birds, The four wheel Bolens built tractors were only built 3 years and I doubt there were very many made. The Rustoleum Hammered finish gold is a good match to the Wards color

Great video from Goodwood Racing from over in your parts

That's funny. I hadn't noticed that the wheel being farther from Ewan's foot made it look huge, the wheel that is.

You can buy 25 zinc coated wheel nuts for 12.50 on epay, not sure of international shipping cost, but that's enough to do three tractors

Andrew had PM'd me and in the course of conversation Andrew brought up that Bolens may have built Montgomery Wards tractors as well and they did, both early walk behinds and 4 wheel Ride-A-Matics and the Montgomery Wards Squire 6, 725 The first fully engineered with the engine and steering axle in the front 4 wheel Garden Tractor that Montgomery Wards offered was the 7 horsepower “Squire 7", introduced in 1959 and stayed the same for 1960-61, it was basically the same as the 1959-1961 Ride-A-Matics. In 1962 a more powerful engine was installed and it became the 7.25 horsepower “Squire 7 ¼â€. In 1963 things changed for Montgomery Wards in their Lawn and Garden tractor lineup. M/W offered a Simplicity built Garden Tractor, called the 7 ¼hp “Squire 725â€, same name as the Bolens tractor. This would be the last year for the Simplicity 700 Series based tractor. Wards also offered a Bolens built “Squire 6â€, based on the Bolens 600 with a different Cast Iron Grill, hood and Steering Tower. Bolens also provided M/W with several of the attachments for the “Squire 6†that they built.

When my get out for a wash day, the wife always spots a "new" one, she is as tickled as I am when I get it.

"you need different shoes for different occasions....." I told my wife that and she said I was a shoe whore.

Actually Iain you are on the right track. By 1965 tractors started to become more sophisticated and user friendly, gone was the primitive behemoth that took hours to change attachments or required constant tinkering. These newer and easier to operate machines were being designed for the wife. You see, here in America at that time most women stayed home, took care of the kids, the laundry, the cooking and cleaning, so it was only obvious that with an hours free time a week left over they could also mow the lawn and thus saving the weekend for dear old dad to relax and enjoys his pipe and pint.

Hey Andrew, your Squire 10 is on video

OH NO, Getting another 3-6 inches of rain today. As bad as it is here, down stream in Texas it is much, much worse. I have determined that the dam of the pond will break (and relieve itself on the neighbors across the road) or run off from the sides will prevent the pond from reaching the house. Our 1/4 acre pond is over 2 acres right now,

Here ya go Andrew. This is a link to Josh Green's Photobucket album where he is restoring his Montgomery Wards Garden Mark Squire 10, a right good name for a good machine. http://s1239.photobucket.com/user/talntedmrgreen/media/Squire%20Restoration%202012/20120923_135453_zps6dd20db3.jpg.html

Looks great, on a side note actual Cub Cadet carts were all IH white (cream)

You mean to say your neighbors DON'T shoot at you or your way when they get upset? How do yo tell if they are mad at you?

Yes after 1982 here in the states

I found an exact copy of the decals used on the Tecumseh OHV HH150 engine, they will make my 1556 restoration top notch. The big balloon 15hp decal goes on the top of the engine shroud and the long one goes on the side, with the small one on the air cleaner cover. The only problem is the seller forgot to include the big Solid State Ignition decal, I've written him and am sure he will make amends.

One of you guys might look into becoming a Stens dealer, they are owned by Briggs and Stratton and are the largest parts distributor in the world. I'm a Stens dealer and I get about 40 percent discount and its on my door step in 48 hours most times, I can't say your shipping will be as quick, but you could buy in volume that way. I bought 10 kohler air filters and foam pre-filters for 38.00 shipped to my door, that's 3.80 a set, of course they were all the same as most of my 14 and 16 hp engines take the same filter

The rod sticking out of the top left side of the lift is for a pulley that runs from the bevel gear box to power a tiller via a belt, pulley, idler that attaches to the rod, at least that's the way the newer ones work

Yes, and past misunderstanding is why I have many many bullet holes in my house, barn, shed, workshop, electric meter, and well house.

Simplicity employed the best engineers and used state of the art engineering going back to right after Word War 1. William J. Niederkorn founded the company in 1922, and started building riding garden tractors in 1939. Their planetary gear transmission was one of the best, their trans-axle one of the toughest, and the design top of the line. They offered a high/low transmission, dual lift levers, front, mid mount, and rear PTO capable implements and later introduced a shuttle shift transmission that was a vast improvement over vari-drive transmissions. A shuttle shift was a four speed hydro, pick 1st, 2nd, 3rd, or 4th gear and the shift lever gave you that gear in forward OR reverse. In the mid 60s like many other brands they also started offering a hydro, but its design was not borrowed from any other design Simplicity made their own and made the best. A drive shaft went from the engine to a bevel gear box with pulleys on either side, one ran the mid mount mower deck and rear tiller PTO drive and the other pulley powered the hydro. This balanced design gave the right amount of power to tractor and implement. With this design the mower decks attached to the tractor on the bottom of the front axle and the rear of the mower drug on wheels, the belt came from below the seat forward to the mower pulley, that way the mower followed the axle and terrain. This was the mower that striped your yard. The Simplicity tractor built in the 1990s was not that different under the tin than the one built in the early 60s, albeit an larger engine. To give you an idea of their competence Allis Chalmers bought them and had them produce their outdoor power equipment going back to 1965. Montgomery Wards also used them to build their tractors including the rare and beautiful Montgomery Wards Twin 20. My 1975 Simplicity built Allis Chalmers 716H was 4100.00 new with just a deck, that was the same price as a nice Ford or Chevrolet car. Simplicity still makes Massey Ferguson and Snapper lawn equipment and is owned by BASCO, you know them better by the name Briggs and Stratton. They also make Ferris ZTRs and own Giant Vac. I will say, in my opinion, Bolens built the toughest tractor made, however Simplicity's design was and is one of the best ever made. All that said, I also believe the Ariens GT was the most versatile GT ever built. All these companies reside within 50 miles of one another in the state of Wisconsin and like John M. Kohler, Harry Bolens, Henry Ariens had a dream of building his product, his company and America. Under the stewardship of the elder Ariens grandson, Michael Ariens, the company acquired the assets of the lawn and garden division of Sperry New Holland, the New Holland tractor division was sold to Ford and Sperry went into a diversified business of aviation avionics and oil production equipment. Ariens had only produced a rear engine rider in the past and while a "johnny-come-lately" in the front engine tractor field, they built many walk behind tillers and introduced the first residential walk behind snow blower, so tractors were not their first or main game anyway. There is rumor of a Simplicity built Ariens and also a Manitowoc built Ariens front engine tractor, but very little is known about either. The Sperry Rand tractor was offered in 12, 14, and 16 hp S models, the last model year (1974) having a tilt wheel. These tractors were painted green and gold, but with the Ariens acquisition in July of 1974 Ariens coated them with their now familiar Ariens orange. Like Simplicity the tractor was virtually unchanged except for larger engines and power steering from 1969 until 1999. Features of the Sperry design included front, mid mount, and rear shaft drives for snow blower, rotary mower, and tiller/brush cutter, as well as hydraulic lifts front, mid, and rear, with a available 3 point lift on the rear and integral lift brackets on the front. The operator could select the desired hydraulic lift by a knob on the left side and employ one 1100 pound cylinder that could raise, lower, and float, as well as having down pressure. At first a Vickers Hydro was used, later the transmission was upgraded to a Sundstrand with a Dana trans-axle similar to the Dodge Dart. Kubota liked the design so much they virtually copied the tractor for its early intrusion into the American lawn and garden market, decks and most tractor parts were interchangeable. Andrew your Montgomery Ward tractor was originally gold as was most of their early power equipment, and yes there was a pulley for the front PTO and the snow blower attached to the tractor in reverse of the mower deck and utilized an upside down mule drive to power the snow blower, flail mower, or brush cutter, compressor, sprayer, or any of a host of other attachments. Back to the Simplicity, In 1967 after years of investigation, Allis Chalmers and several other American firms were found guilty of price fixing and operating under a monopoly. In 1960, the U.S. government uncovered an attempt to form a cartel in the heavy electric equipment industry. It charged 13 companies, including the largest in the industry (Westinghouse, General Electric, and Allis-Chalmers), with price fixing and bid rigging Most feigned innocence, but Allis-Chalmers pleaded guilty. Although one motive for the forming of cartels is so that amply profitable firms can try to become obscenely profitable, it did not apply in this instance, the attempt at a heavy-electrical cartel was a desperate (and foolish) attempt to turn red ink to black ink among fierce competition. To punish Allis the government required them to sell off many of their assets and acquisitions, one of them being Simplicity Between 1967 and 1974 Allis built their own line of riding mowers, tillers and tractors in Lexington South Carolina, in 1974 the lawsuit and punishment was withdrawn and the partnership with Simplicity was renewed, However many of those Allis built tractors of the last few years had no Simplicity counterpart and were much of their own design, especially the 300 and 400 series from 1972 to 1974. After renewing the partnership with Simplicity Allis closed the plant in Lexington and moved its operation back to Port Washington Wisconsin and in the end destroyed all spares for the tractors built in those years. The 1975 year saw Simplicity model 7000 series garden tractors like the 7010, 7012, and 7016 the Allis counterpart models were badged the 700 series like the 710, 712, and 716 and were offered in four transmissions and five different engine combinations. For the most part, after 1972 Simplicity used Briggs and Stratton engines and Allis Chalmers used Kohler engines. Sorry for the "novel", I tend to get carried away about OPE history, BTW, I did abbreviate this considerably from its original length , lol. It was close, but the later B series Allis tractors had differences from the Simplicity models, some so small they confounded many dealers and owners. yep, that is right

Good news and Bad news. The good news is the county gave me two 20 ton loads of top soil, the bad news it was the neighbors driveway that had washed into the county ditch. These people are not very intelligent, they drive a semi-truck for a living and drive it into their yard via a dirt path without gravel (well no gravel for 30 years), when the rains come heavy like they do it washes more and more of their rutted driveway into the county bar ditch blocking water flow. The county removed their culvert pipe and all the dirt and hauled it over to my place after I requested the dirt. I asked them how the neighbors will access their home without a crossing to drive over, the county guy said "not his problem". I can use the dirt to keep water away from my home, I hope the neighbors understand it wasn't my fault waht the county did, maybe I should take them a plate of biscuits.