Disc harrows

[the showman 4,074]

While i was out today collecting mine and Norms ploughs i found a set of disc harrows that are adjustable, i just had to have them

[Stormin 4,458]

You're going to have to get an allotment, Chris. You just need a stitcher.

[Tom 215]

Very nice Chris, you don't seem them very often. I've been looking for a set for a while now and they are always too big!

 

Tom

[meadowfield 1,900]

awesome Chris!!!!

 

they are 60's wheel horse ones, by the looks of them

[Charlie Smith 192]

Looking good, are they all free turning? Plough, Discs, got a nice little collection.

[vegikev 126]

chris can i have the measurements for them as i might have some for you, old but un-used

[ranger 373]

Very nice find Chris. you'll have to be careful if you give these your usual shiny paintwork, Your likely to have seagulls trying to mate with their reflection when you use them! (that's the excuse I give for not painting mine + if they don't shine, the pikey's are less likely to spot them.)

These are my discs, part of the 80's wheelhorse 'implement pack': discs; plough and cultivator.

I only have the discs and cultivator, I need to fit my 'stubble' plough unit to the frame, all the different implements fit the same beam, you change over the hitch mounting to angle the plough.

[pmackellow 2,738]

Good find Mr Showman !

[the showman 4,074]

Had a bit of a play with them this afternoon, here's a couple of photos

[Stormin 4,458]

Hope you can remember where all the bits go.

[the showman 4,074]

Hows that, this was tea time, all back together and working and adjusting

[Stormin 4,458]

But they're not painted.  And where's the stickers?

[the showman 4,074]

Just wanted to get them useable for now, might paint them at a later date

[Triumph66 1,256]

Chris, good to see you got it all moving freely. Just out of interest what are the dimensions of it?

Thanks

Andrew

[the showman 4,074]

It is 34 inches wide, discs are 11 inches and its 24 inches long

[Triumph66 1,256]

Thanks Chris. So it would fit happily in the back of my car if I should get one.

[the showman 4,074]

I imagine so Andrew, it's quite light too, but it won't be this one though lol !

[Triumph66 1,256]

Oh that's a pity! All that work you have done on it I thought that will do me.....

[Alfiee T 17]

I have a small set of disc harrows! Bought them off eBay a few months ago! I've never seen any like it and that small before. They don't look homemade but do look like a proper set you would find on a farm. They are adjustable too but in need of being stripped and painted.

[Stormin 4,458]

Those are a neat little set, Alfiee.

[HeadExam 1,783]

Very nice find Chris. you'll have to be careful if you give these your usual shiny paintwork, Your likely to have seagulls trying to mate with their reflection when you use them! (that's the excuse I give for not painting mine + if they don't shine, the pikey's are less likely to spot them.)

These are my discs, part of the 80's wheelhorse 'implement pack': discs; plough and cultivator.

I only have the discs and cultivator, I need to fit my 'stubble' plough unit to the frame, all the different implements fit the same beam, you change over the hitch mounting to angle the plough.

051.JPG053.JPG052.JPGP1020797.JPG

That looks almost like 1980s Allis tool bar, that held a cultivator, plow, and harrow